Structural characteristics and high-temperature oxidation behavior of porous Fe–40 at.%Al alloy
- 210 Downloads
Porous FeAl alloy was prepared by Fe and Al elemental reaction synthesis. The cyclic oxidation evolutions of porous Fe–40 at.%Al alloy at the elevated temperatures of 600 and 800 °C in air were studied and compared to porous materials of Ti, Ni, and 316L stainless steel. It has been shown that the oxidation of porous Fe–40 at.%Al alloy fitted a power law and no spallation was found after cyclic oxidation for 202 h in air. The porous FeAl alloy exhibits much better oxidation resistance than other porous materials, such as Ti, Ni, and 316L stainless steel, indicating that the porous Fe–40 at.%Al alloy has the highest structural stability at the elevated temperature in the oxidation atmosphere. Thus, the porous FeAl alloy can be used as filtering materials at elevated temperature in the oxidation atmosphere.
KeywordsPorous Material High Temperature Oxidation 316L Stainless Steel Oxidation Time Cyclic Oxidation
This research was performed under the auspices of National Basic Research Program of China (No. 2009CB623400), National Natural Science Foundation of China (No.20476106 and No.20636020), National Natural Science Founds for Distinguished Young Scholar (No.50825102) and the 111 Project of Chinese Ministry of Education.
- 1.Davis TW (2000) Air pollution engineering manual. Wiley, CanadaGoogle Scholar
- 4.Hsieh HP (1996) Inorganic membrane for separation and reaction. Elsevier Science B V, New YorkGoogle Scholar
- 10.Pang HJ, Ye YF, Chen B (2006) Heat Treat Met 31:55Google Scholar
- 21.Lin XQ, He YH, Jiang Y, Zhang FS (2005) Mater Sci Eng Powder Metall 10:127Google Scholar
- 22.German RM (1994) Powder metallurgy science. Metal Powder Industries Federation, Princeton, p 370Google Scholar
- 24.Czichos H, Saito T, Smith L (2006) Springer handbook of measurement methods for materials properties. Springer Science + Business Media, Inc, New YorkGoogle Scholar
- 28.Li MS (2001) High temperature corrosion of metals. Metallurgical Industry Press, BeijingGoogle Scholar
- 31.Qu HL, Zhou L, Wei HR, Zhao YQ (2001) Chinese J Nonferrous Met 11:398Google Scholar
- 32.Zhai JK (1994) High temperature corrosion of metals. Beijing Aeronautic and Astronautics University Press, Beijing, p 60Google Scholar
- 34.Novikov VV (1983) J Eng Phys 44:660Google Scholar