Abstract
Duplex stainless steels (DSS) are well known for their higher mechanical strength and better corrosion resistance. DSS is commonly used in the marine construction, petrochemical, and chemical industries. DSS (2205) has equal amounts of α and γ phases. However, unlike the parent metal, the solidification microstructure of the fusion zone in the weld does not have nearly equal amounts of the α and γ phases. Thus the mechanical properties and corrosion resistance of DSS welds are degraded. The interpass temperature plays a vital role in achieving balanced α and γ phases, which in turn results in improved mechanical and corrosion resistance. Gas tungsten arc welding (GTAW) is employed for welding of thin sheets/plates. The GTAW process ensures small amounts of slag formation during welding, which eliminates slag crevices and sites for corrosion attack. Standard 2205 (UNS S31803) DSS sheets of 5 mm thickness, with 22.37% Cr and 5.74% Ni, were used in this study. Weld beads were produced with Zeron-100 super DSS filler wire with higher alloy content (26% Cr and 8% Ni). Argon (Ar) and helium (He) were employed as shielding gases. Heat input was maintained <1 kJ/mm. Interpass temperatures were maintained at 120°C. The ferrite number of the weld metal for the two different shielding gases was investigated. Mechanical properties of joints such as impact strength and hardness were evaluated. Microstructure evaluation was also carried out.
Similar content being viewed by others
References
Folkhard E (1988) Welding metallurgy of stainless steel. Springer-Verlag, Vienna, p 186
Karlsson L, Ryen L, Pak S (1995) Weld J 74(11):28s
Kotecki DJ (2000) Weld J 79(12):346s
Hilkes J, Bekkers K (1995) Weld J 74(11):51
Badij R, Belkessa B, Maza H, Bouabdallah M, Bacroix B, Kahloun C (2004) Mater Sci Forum 217:467
Wang S-H, Chiu P-K, Yang J-R, Fang J (2006) Mater Sci Eng A 420:26
Muthupandi V, Bala Srinivasan P, Seshadri SK, Sundaresan S (2003) Mater Sci Eng A 358:9
Bonnefois B, Charles J, Dupoiron F, Soulignac A (1991) Proceedings of the conference on duplex stainless steels ‘91, vol 1, Beaune, France, p 347
Bonollo F, Tiziani A, Zambon A, Penasa M (1994) Proceedings of fourth international conference on duplex stainless steels, paper 108, vol 2, Glasgow, Scotland, p 13
Brown EL, Burnett ME, Purtscher PT, Krauss G (1983) Metall Mater Trans A 14:791
Zambon A, Bonollo F (1994) Mater Sci Eng A 178:203
Kou S (2003) Welding metallurgy, 2nd edn. Wiley, Hoboken, NJ, p 225
Ramirez AJ, Lippold JC, Brandi SD (2003) Metall Mater Trans A 34:1575
Gooch TG (1982) ASM conference on duplex ferritic-austenitic stainless steels, St. Louis, p 573
Ku JS, Ho NJ, Tjong SC (1997) J Mater Process Technol 63:770
Honeycombe J, Gooch TG (1978) Proceedings of trends in steels and consumables, The Welding Institute, London, p 28
Wahlberg G, Dunlop GL (1987) Proceedings of the conference on stainless steels, The Institute of Metals, University of New York, p 291
Hertzman S, Jargelius Pettersson R, Blom R, Kivineve E, Eriksson J (1996) ISIJ Int 7(36):968
Siegmund T, Werner E, Fisher FD (1993) Comput Mater Sci 1:234
Kokawa H, Tomita M, Kuwana T (1995) Weld Int 9(3):8
Ogawa T, Koseki T (1989) Weld J 68:181s
Charles J (1991) Proceedings of the conference on duplex stainless steels ‘91, Les editions de physique, Beaune, p 3
Ogawa K, Komizo Y, Azuma S, Kudo T (1992) Trans Jpn Weld Soc 23(1):40
Acknowledgement
The authors would like to express their heartfelt thanks to Mr. P. Veerappan, Proprietor, Keerthana Engineering Works, Tiruchirappalli-15, Tamil Nadu, India, for conducting the welding trials in his factory.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Sathiya, P., Aravindan, S., Soundararajan, R. et al. Effect of shielding gases on mechanical and metallurgical properties of duplex stainless-steel welds. J Mater Sci 44, 114–121 (2009). https://doi.org/10.1007/s10853-008-3098-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10853-008-3098-8