Advertisement

Journal of Materials Science

, Volume 41, Issue 22, pp 7380–7386 | Cite as

Effects of Co, Mo, and Ni on magnetic properties in 3Si–0.1Sn–0.08Sb alloyed non-oriented electrical steels

  • Sam K. Chang
Article

Abstract

With the addition of Co, Mo and Ni to high-alloyed non-oriented electrical steels with 3Si–0.1Sn–0.08Sb, Ni increased grain size more than Co and Mo. A very low level of core loss (W 15/50 = 2.2 W/kg) and high magnetic induction (B 50 = 1.7 T) were obtained in the Ni added steel. However, Co and Mo deteriorated the magnetic properties substantially. With respect to the texture effect on magnetic properties, core loss decreased and magnetic induction increased proportionally to texture factor (ratio of the sum of cube and Goss texture to γ fiber), while correlations of anisotropies of core loss and magnetic induction to the texture factor appeared parabolic.

Keywords

Magnetic Property Core Loss Electrical Steel Cube Texture Annealed Steel 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Chang SK, Huang WY (2005) ISIJ Int 45:918CrossRefGoogle Scholar
  2. 2.
    Texture measurement software, Res-Mat Co, McGill UniversityGoogle Scholar
  3. 3.
    Liu WC, Morris JG (2004) Met Mat Trans A 35A:265Google Scholar
  4. 4.
    Shimanaka H, Ito Y, Matsumura K, Fukuda B (1982) J Magn Magn Mater 26:57CrossRefGoogle Scholar
  5. 5.
    Birsan M, Szpunar JA (1996) J Appl Phys 80:6915CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, LLC 2006

Authors and Affiliations

  1. 1.Graduate Institute of Ferrous TechnologyPOSTECHPohangKorea

Personalised recommendations