References
L. CHARLES, TUCKER III and PAULA MOLDENAERS, Annu. Rev. Fluid Mech. 34 (2002) 177.
G. O. SHONAIKE and G. P. SIMON, “Polymer Blends and Alloys” (Marcel Dekker: New York, 1999) p. 1.
L. A. UTRACKI and Z. H. SHI, Polym. Eng. Sci. 32 (1992) 1824.
L. CHEN, X. WANG, R. STRAFF and K. BLIZARD, Polym. Eng. Sci. 42 (2002) 1151
S. LEE, T. Polym. Eng. Sci. 33 (1993) 418.
J. A. BIESENBERGER and S. T. LEE, Polym. Eng. Sci. 26 (1986) 982.
J. A. BIESENBERGER and S. T. LEE, Polym. Eng. Sci. 27 (1987) 510.
J. A. BIESENBERGER and S. T. LEE, Polym. Eng. Sci. 29 (1989) 782.
M. FAVELUKIS, Z. TADMOR and R. SEMIAT, AIChE. J. 45 (1999) 691.
Y. C. PENG, M. C. GUO, L. LI and K. L. LI, J. Mater. SCI. Lett. 22 (2003) 639.
Z. L. CHEN, “Doctoral Thesis” (South China University of Technology, 2000) p. 89.
C. D. HAN and H. J. YOO, Polym. Eng. Sci. 21 (1981) 518.
C. D. HAN, “Rheology in Polymer Processing” (Academic Press, New York, 1976) p. 165.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cai, YB., Guo, MC., Chen, ZL. et al. Interface deformation and the parameters relevant to bubble detachment when gas is injected into polymer melt flow field. J Mater Sci 40, 3553–3557 (2005). https://doi.org/10.1007/s10853-005-2887-6
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s10853-005-2887-6