Journal of Materials Science

, Volume 40, Issue 9–10, pp 2217–2219 | Cite as

Surface tension of melts of Na-K-Cs ternary system

  • B. B. Alchagirov
  • R. Kh. Arkhestov
  • T. M. Taova
  • Kh. B. Khokonov
Proceedings of the IV International Conference High Temperature Capillarity


In this work the results of the experimental study of surface tension (ST) of alkali metals and their Na-K-Cs ternary system over the whole composition range and for temperatures from the melting point to 680 K are presented. Careful thermal treatment for several hours at 700 K under 10− 7 Pa vacuum condition and a new way of loading the measuring cell have been used to exclude possible contamination of the liquid metals and the measuring cell. To measure ST the sessile-drop method, which yields an experimental error of 1% with 95% probability, was used. Contents of impurities were not larger than 0.005%.

Surface tensions of 110 Na-Cs-K alloys have been measured over the whole composition triangles for the first time. Polytherms of ST for pure metals and ternary alloys are well described by linear equations. The isotherms of ST for each Na/Cs + K section have been constructed. It was found that K is a surface-active addition in ternary alloys when XNa:XCs > 14:1, while it becomes a surface-inactive component if XNa:XCs < 14:1. All ternary alloys along the XNa:XCs = 14:1 section have the same ST, independent from K content. Lines of equal values of ST have been plotted for the whole composition triangles as well.


Surface Tension Alkali Metal Ternary Alloy Electronic Work Function Composition Triangle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    P. N. BISTROV, D. N. KAGAN, G. A. KRECHETOVA and E. E. SHPILRINE, “Liquid Metallic Coolant in the Thermal Pipes and Energy Devices” (Nauka, Moscow, 1988) p. 263.Google Scholar
  2. 2.
    B. B. ALCHAGIROV and Kh. B. KHOKONOV, in “Physics and Chemistry of Perspective Materials,” edited by Kh. B. Khokonov (KBGU, Nalchik, 1988) p. 40.Google Scholar
  3. 3.
    V. N. MIKHAILOV, V. A. EVTIKHIN, I. E. LUBLINSKI, A. V. VERTKOV and A. N. CHUMANOV, “Lithium for Fusion Reactors and Space Nuclear Power Systems of XXI Century” (Energoatomizdat, Moscow, 1999) p. 528.Google Scholar
  4. 4.
    A. G. MOZGOVOI, V. V. ROSHUPKIN, S. N. SKOVORODKO, A. N. CHERNOV and E. E. SHPILRINE, “Density of Liquid Alloys of Alkali Metals. Experiment” (IVTAN, Moscow, 1989) p. 147.Google Scholar
  5. 5.
    B. B. ALCHAGIROV and KH. B. KHOKONOV, Therm. Phys. of High Temperat. 32(4) (1994), 590; 32(5) (1994), 756.Google Scholar
  6. 6.
    F. K. HANSEN and G. ROBSURD, J. Colloid Interface Sci. 141(1) (1991), 1.CrossRefGoogle Scholar
  7. 7.
    A. B. ALCHAGIROV, B. B. ALCHAGIROV and KH. B. KHOKONOV, Patent No. 2086957 (Russia, 1997).Google Scholar
  8. 8.
    R. F. BERG, M. R. MOLDOVER, S. RABINOVICH and A. VORONEL, J. Phys. (F): Met. Phys. 17(9) (1987), 1861.ADSGoogle Scholar
  9. 9.
    “Handbook of Thermodynamic and Transport Properties of Alkali Metals,” edited by R. W. Oshe (Blackwell Scientific Publications Ltd., Oxford, UK, 1985) p. 987.Google Scholar

Copyright information

© Springer Science + Business Media, Inc. 2005

Authors and Affiliations

  • B. B. Alchagirov
    • 1
  • R. Kh. Arkhestov
    • 1
  • T. M. Taova
    • 1
  • Kh. B. Khokonov
    • 1
  1. 1.Department of PhysicsKabardino-Balkarian State UniversityNalchikRussia

Personalised recommendations