Hardware-in-the-Loop Testing of Automatic Lift Dropping System for Heavy Trucks

Abstract

This paper focuses on a novel hardware-in-the-loop (HIL) system designed for developing the automatic operation of the axle lifting and dropping system for heavy trucks for compliance with the European Union Mass and Dimensions Policy and for evaluating the developed system for different axle loading, road slippage, truck speed, handbrake position and driver input combinations. Such a system is expected to be advantageous over manual operation in fuel consumption, tire wear, road surface damage and ease of taking off on slippery surfaces. An auto lift/drop algorithm in the form of a State Transition Diagram (STM) was developed to meet these requirements and has been implemented in the developed HIL simulation system that contains mechanical, pneumatic, electrical and control elements and a TruckMaker simulation model. In the HIL simulator, the electronic control unit (ECU) operated as if it is working in the real truck. Comprehensive scenarios can be generated and executed in this HIL simulation environment to test the algorithm and the set-up itself before the more expensive and time consuming experimental verification with a real truck. This approach allowed the lift axle automation algorithm and hardware to be tested fully in a safe lab environment where the algorithm could be improved and optimized Results of the HIL simulation verified the advantages of such an automated lift axle lifting and dropping system over manually operated axle dropping systems. The developed system was successfully implemented later in a truck and was used in series production trucks.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    Cole, D.J., Cebon, D.: Truck suspension design to minimize road damage. P I MECH ENG D-J AUT. 210(2), 95–107 (1996)

  2. 2.

    Kawamura, A.: Some considerations of road surface and truck endurance. Int J Heavy Veh Syst. 6(1/2/3/4), 238–252 (1999)

    Article  Google Scholar 

  3. 3.

    Salem, H.M.A.: Effect of excess axle weights on pavement life. Emirates J Eng Res. 13(1), 21–28 (2008)

    MathSciNet  Google Scholar 

  4. 4.

    Sharma, B.M., Sitaramanjaneyuiu, K., Kanchan, P.K.: Effect of Vehicle Axle Loads on Pavement Performance, pp. 263–272. Road transport technology-4: proceeding of the Fourth International Symposium on Heavy Vehicle Weights and Dimensions, Ann Arbor (1995)

  5. 5.

    Yi, K., Hedrick, J.K.: Active and Semi-Active Heavy Truck Suspensions to Reduce Pavement Damage. University of California Transportation Center. University of California Transportation Center, UC Berkeley (1989) Retrieved from: http://escholarship.org/uc/item/573562sj. Accessed 03 Mar 2019

  6. 6.

    EU Directive 1230/2012. Retrieved from: http://eurlex.europa.eu/LexUriServ/LexUriServ.do?uri=OJ:L:2012:353:0031:0079:EN:PDF. Accessed 03 Mar 2019

  7. 7.

    Shukla, J., Grinspan, A., Subramanian, J.: Design and analysis of lifting pusher drop axle for heavy commercial vehicle. SAE Int J Commer Veh. 10(1), 8–17 (2017)

    Article  Google Scholar 

  8. 8.

    Huang, W., Fan, Y., Yu, M.: (in press) Research on loaded brake performance test of trucks. Int J Heavy Veh Syst. (2019)

  9. 9.

    Tolea, B., Radu, A.I., Dima, D.S. and Beles, H. (2018), The influence of the suspension upon the axle weight distribution for heavy trucks, Int. Congress of Automotive and Transport Engineering, retrieved from https://doi.org/10.26825/bup.ar.2018.007

  10. 10.

    Fathy, H.K., Filipi, Z.S., Hagena, J., Stein, J.L.: Review of hardware-in-the-loop simulation and its prospects in the automotive area. Modeling and simulation for military applications, Proc SPIE. 6228, 62280E (2006). https://doi.org/10.1117/12.667794

  11. 11.

    Pizetta, I.H.B., Brandão, A.S., Sarcinelli-Filho, M.: A hardware-in-the-loop platform for rotary-wing unmanned aerial vehicles. J. Intell. Robot. Syst. 84, 725 (2016). https://doi.org/10.1007/s10846-016-0357-9

    Article  Google Scholar 

  12. 12.

    Salaani, M.K., Mikesell, D.R., Boday, C., Elsasser, D.: Heavy vehicle hardware-in-the-loop automatic emergency braking simulation with experimental validation. SAE Int J Commer Veh. 9(2), 57–62 (2016)

    Article  Google Scholar 

  13. 13.

    MATLAB and Simulink Release 2015, The MathWorks, Inc., Massachusetts, United States

  14. 14.

    Truckmaker. Retrieved from: https://ipg-automotive.com/products-services/simulation-software/truckmaker/. Accessed 03 Mar 2019

  15. 15.

    Wainer, G.A., Goldstein, A., Khan, A.: Introduction to the Discrete Event System Specification Formalism and its Application for Modeling and Simulating Cyber-Physical Systems, pp. 177–191. Winter Simulation Conference (WSC), Gothenburg (2018)

    Google Scholar 

Download references

Acknowledgements

This work was supported in part by the Ministry of Science, Industry and Commerce of Turkey through SANTEZ Project 00905.STZ.2011–1.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Erdinç Altuğ.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Acar, O.U., Güvenç, L. & Altuğ, E. Hardware-in-the-Loop Testing of Automatic Lift Dropping System for Heavy Trucks. J Intell Robot Syst 98, 693–703 (2020). https://doi.org/10.1007/s10846-019-01092-0

Download citation

Keywords

  • HIL testing
  • Truck axle dropping
  • Intelligent vehicles