Abstract
We tested, by means of simulations, the idea of a patterned contact between composite electrode and electrolyte of a SOFC. Simulation results show that the patterned studied geometry can improve the performance of the assembly in “intermediate” conditions, i.e. when there are neither ohmic nor kinetic limitations. The gain reached up to 45 % in terms of current density drawn, with respect to a standard flat contact.
Similar content being viewed by others
References
S. Tao, J.T.S. Irvine, J.A. Kilner, Adv. Mater. 17, 1734–1737 (2005)
J. Peña-Martinez, D. Marrero-Lòpez, D. Pèrez-Coll, J.C. Ruiz-Morales, P. Nuñez, Electrochim. Acta 52, 2950–2958 (2007)
Z. Shao, S.M. Haile, Nature 431, 170–173 (2004)
H. Lv, H.-y. Tu, B.-y. Zhao, Y.-j. Wu, K.-a. Hu, Solid State Ion. 177, 3467–3472 (2007)
S. Tao, J.T.S. Irvine, Nat. Mater. 2, 320–323 (2003)
J.B. Goodenough, Y.-H. Huang, J. Power Sourc. 173, 1–10 (2007)
H. Zhu, R.J. Kee, V.M. Janardhanan, O. Deutschmann, D.G. Goodwin, J. Electrochem. Soc. 152, A2427 (2005)
A. Hammouche, E.J.L. Schouler, M. Henault, Solid State Ion. 28–30, 1205–1207 (1988)
J. Mizusaki, H. Tagawa, K. Naraya, T. Sasamoto, Solid State Ion. 49, 111–118 (1991)
Y. Takeda, Y. Sakaki, T. Ichikawa, N. Imanishi, O. Yamamoto, M. Mari, N. Mori, T. Abe, Solid State Ion. 72, 257–264 (1994)
A. Bertei, C. Nicolella, F. Delloro, W.G. Bessler, N. Bundschuh, A. Thorel, ECS Trans. 35(1), 883 (2011)
Y. Ji, J.A. Kilner, M.F. Carolan, Solid State Ion. 176, 937–943 (2005)
D. Arnost, P. Schneider, Chem. Eng. J. 57, 91–99 (1995)
B. Todd, J.B. Young, J. Power Sourc. 110, 186–200 (2002)
B. Choi, P. Kenney et al., SOFC XI ECS Trans. 25, 1341 (2009)
Acknowledgments
Many thanks to Cristiano Nicolella (Dep. of Chemical Engineering, Università di Pisa, via Diotisalvi 2, 56126 Pisa, Italy) for giving the possibility to perform the simulations in his institute with the commercial software COMSOL®.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Delloro, F., Viviani, M. Simulation study about the geometry of electrode-electrolyte contact in a SOFC. J Electroceram 29, 216–224 (2012). https://doi.org/10.1007/s10832-012-9766-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10832-012-9766-8