# T-Analyst: a program for efficient analysis of protein conformational changes by torsion angles

- 735 Downloads
- 18 Citations

## Abstract

T-Analyst is a user-friendly computer program for analyzing trajectories from molecular modeling. Instead of using Cartesian coordinates for protein conformational analysis, T-Analyst is based on internal bond-angle-torsion coordinates in which internal torsion angle movements, such as side-chain rotations, can be easily detected. The program computes entropy and automatically detects and corrects angle periodicity to produce accurate rotameric states of dihedrals. It also clusters multiple conformations and detects dihedral rotations that contribute hinge-like motions. Correlated motions between selected dihedrals can also be observed from the correlation map. T-Analyst focuses on showing changes in protein flexibility between different states and selecting representative protein conformations for molecular docking studies. The program is provided with instructions and full source code in Perl.

## Keywords

Molecular dynamics Entropy Allosteric Simulation Drug screening Docking HIV protease AMBER## Introduction

The conformational dynamics of proteins play important roles in their functions and regulating ligand binding. A fundamental appreciation of how proteins work requires study of conformations and dynamics, as well as changes between states of protein motions, such as folded/unfolded and ligand-bound/-free states. For example, protein allosteric effects may be related by either or both conformational and dynamical changes [1, 2, 3]. Molecular dynamics (MD) simulations provide powerful tools for the exploration of the conformational energy landscape accessible to protein molecules because multiple conformations are difficult to probe experimentally [4, 5, 6]. Moreover, recent computer-aided drug discovery studies have focused on protein flexibility in molecular docking processes [7, 8, 9]. Since most docking software prefers proteins to be rigid to avoid intensive computational effort, a promising strategy is to dock ligands into protein conformation ensembles obtained from MD simulations [10, 11]. Several programs provide general tools or special modules for analysis of MD results and clustering conformations, but most are based on Cartesian coordinates [12, 13, 14, 15, 16, 17]. T-Analyst uses internal bond-angle-torsion (BAT) coordinates, which are efficient in capturing side-chain rotamers and most low-frequency motions [18, 19, 20]. Our program provides useful tool to analyze MD trajectories. For example, users can easily view proper rotameric states of dihedrals from the output files instead of plotting and correcting them manually. This program allows for efficient analysis of MD simulations to study protein flexibility and extract structural information for virtual screening.

## Method

### Data manipulation and output

T-Analyst reads NAMD, Amber or CHARMM trajectory files and Amber topology file. The CHARMM-type topology files can be converted to Amber topology files easily with the freely available CHAMBER program [21]. The program implements amber2accent to transform Cartesian coordinates to BAT coordinates [22]. To eliminate repeats, only heavy-atom side-chain torsion angles and ω, φ and ψ angles in backbones are considered. Users can choose angles and residues for analysis, and a dihedral distribution and its rotations during a simulation are output as .agr-format files, which can be viewed with Xmgr/Grace. Moreover, results generated by T-Analyst can be visualized by freely available packages such as VMD, Xmgr/Grace or R [12, 23, 24]. Users can output a series of files, such as distributions of all or selected torsion angles in a protein, or sorted and/or unsorted standard deviations and entropy. T-Analyst also groups different conformations based on rotameric states of residues of interest and outputs coordinates of grouped conformations into different trajectory files. The program also computes pairwise cross-correlation coefficients for all pairwise dihedral angles that users selected. By examining the output correlation map, dihedrals that correlate with each other can be observed.

### Torsion angle correction

### Configurational entropy calculation and dihedral correlation

T-Analyst calculates configurational entropy, S_{conf,} for each torsional degree of freedom by the Gibbs entropy formula: TS_{conf(i)} = −RT Σ P_{i} ln(P_{i}), where P_{i} is the probability distribution of angle i, R is the gas constant and T is the absolute temperature. T-Analyst calls Xmgr/Grace to generate histogram for each degree of freedom. The bin size for each P_{i} is 0.5° for ω angle, 1° for φ and ψ angles and 5° for side-chain dihedrals. The value of TS_{conf(i)} has unit of kcal/mol, which allows for direct comparison with energy calculations. Summing TS_{conf(i)} provides a quick approximation of the entropic contribution of a system, although coupling between torsions is ignored [25].

T-Analyst also computes the quasi-harmonic approximation (QH) from BAT coordinates. The covariance matrix **C** can be computed, with the probability distribution functions approximated by a multidimensional Gaussian distribution function [26]. The configurational entropy from QH is computed by TS_{QH} = 1/2 nRT + 1/2 RT ln[(2π)^{n} det(**C**)], where *n* is the number of torsions. Although QH assumes that the probability distribution function is Gaussian, which is accurate for torsions that have only one rotameric state, TS_{QH} provides an upper bound limit for the configurational entropy [25, 27]. Moreover, the off-diagonal elements of the covariance matrix indicate the degree of significance of the coupling between the given torsions. Entropy computed from only the diagonal elements of the covariance matrix, TS_{QH_diag}, is also computed. If TS_{QH} equals TS_{QH_diag}, then there is no coupling among these torsions.

The extent to which pairs of dihedrals are correlated with one another can be assessed by examining the magnitude of their cross-correlation coefficients. T-Analyst computes a correlation matrix of dihedrals and calls levelplot function in R to plot a correlation map. Users can select dihedral angles, e.g. backbone φ and ψ angles of selected residues, to plot a correlation matrix. Typical characteristics of a correlation map include a line of strong cross-correlation along the diagonal (where matrix element i = j), and off-diagonal cross-correlations. The high diagonal values are set to 1.00. Off-diagonal correlations can be either positive or negative, and non-zero values may indicate potentially interesting correlations between two close proximity or non-contiguous regions of a protein system.

### Clustering protein conformations

Our program clusters protein conformations on the basis of user-selected rotameric states of residues. Although RMSD-based clustering methods are mostly applied to group conformations with significant differences, small fluctuations are challenging to detect with classical RMSD-based clustering methods. This module is particularly useful for choosing representative conformations based on side-chain rotations of key residues. Users can input specific torsions with rotameric states of interest and the range of each torsion to run T-Cluster, the second part of T-Analyst. T-Analyst will provide all the combinations of groups for further analysis. The program is sensitive to dihedral rotations and can efficiently group user picked backbone or side-chain dihedrals into separate trajectory files. A report file is also generated to record information about each group.

### Molecular dynamics simulations

Molecular dynamics simulations on ligand-free and ligand-bound TRPS were performed using the NAMD package [23]. Standard simulation procedures (e.g. ([28]) were followed using the Amber 10 package and ff03 Amber force field and general Amber force field [6, 29]. Initial coordinates of TRPS were taken from PDB code 2J9X and 3CEP [30, 31]. Briefly, after preparation of the system by sequential steps of energy minimization and equilibration, the 30 ns production runs were carried out at 298 K and 1 atm. The systems were solvated by a 12 Å TIP3P water box. Snapshots of the atomic coordinates were recorded every 1 ps. As T-Analyst does not require too many frames to run the analysis, snapshots were saved every 20 ps for T-Analyst and 1,500 frames were used. Molecular dynamics simulations on HIV-1 protease were initiated from crystallographic coordinates with a semi-open flap conformation (PDB code 1HHP) [32]. Amber ff99 force field was used for the protein. Aqueous solvation was modeled implicitly by using the Generalized Born approach [33] and temperature was maintained at 298 K by using Langevin dynamics. Standard simulation procedures (e.g. [34]) were followed with the Amber 9 package. Since the free protease predominantly populates the semi-open conformation, we took a 1.5 ns MD simulation and saved it as one 1,500 frame trajectory which had one flap open state for our analysis.

## Analysis of MD simulations

### Analysis of protein conformations

Analysis of small backbone fluctuations, as well as conformational changes, involves investigating loop or side-chain motions. T-Analyst adopts torsion angle analysis, which allows for accurate expression of bond rotations. For example, Fig. 1a shows a rotameric state of side-chain Ile 153 of ligand-bound TRPS. Standard deviations of this torsion before and after angle correction are 136.4° and 49.4°, respectively. Large differences in standard deviations usually indicate changes in rotameric states. Of note, proper angle correction is necessary for computing accurate rotamers and their standard deviations.

One common method to express protein flexibility is by showing their rotameric states computed from corrected torsion angle distributions. When comparing the rotameric states for proteins between different states, e.g. ligand-bound/-free states, folded/unfolded states, users can have valuable information regarding the protein conformational or flexibility changes between different states. Different ligand mechanisms, such as induced fit or conformational selection (population shift) can be studied [1, 36] .

### Clustering protein conformations

Docking potential ligands to target protein is one of the key steps in drug design and discovery process. During ligand–protein docking process, the position of side-chains in binding site can affect ligand–protein interaction significantly and directly, especially when using rigid protein conformations. Here we use the program to group conformations and then select representative conformations for performing docking studies to the α-subunit of TRPS. TRPS is a potential antibiotic target, and two torsion angles, Glu 49 and Ile 153, are known to directly involve in ligand–protein binding (see Fig. 3). Figure 3a, b show the distribution of side-chain torsion angles in both residues in ligand-free state which is output by T-Analyst after angle correction. Two populations are shown in each of the torsion angle distributions. T-Analyst can group the trajectories into four groups which are characterized by—group 1 (Glu 49-a, Ile 153-a), group 2 (Glu 49-a, Ile 153-b), group 3 (Glu 49-b, Ile 153-a), group 4 (Glu 49-b, Ile 153-b). Figure 3c, g show the RMSD distribution of Glu 49 and Ile 153 with simulation time. Figure 3d, h are the group distributions for the two torsion angles. Notably, although different protein conformations are usually clustered based on computed RMSD, the value is less sensitive to small scale conformational changes, such as side-chain rotations in a protein’s active site. As illustrated in Fig. 3c, g, there is no clue from RMSD that may be used for grouping. In contrast, T-Analyst also provides information regarding jumping between groups during a course of MD simulation, see Fig. 3d, h.

### Configurational entropy

Protein allosteric effects or post-translational modifications such as phosporylation do not always involve substantial conformational changes. Recent experiments confirmed that in some cases, visual inspection of the active/inactive states may not reveal differences in the shape of the ligand binding site, but changes in protein dynamics [3]. Therefore, the magnitude of configuration entropy computed from dihedral degrees of freedom provides a direct way to examine protein flexibility.

_{conf}) associated with molecular motion. The latter can be used to represent protein flexibility. Therefore, quantifying the configurational entropy, especially changes, could help explain important biochemical processes such as protein folding and ligand–protein binding. Figure 5 shows S

_{conf}calculated from selected backbone and side-chain dihedrals in the binding site of TRPS. T-Analyst suggested that the flexibility of a loop region changes significantly when the ligand binds into the pocket.

The calculations can provide quantitative information regarding entropy gain or loss. For example, in Fig. 5b, the side-chain entropies of Tyr 175 and Thr 183 drop notably, around 0.7 and 0.6 kcal/mol, respectively. In the ligand-bound state, Tyr 175 forms a stable hydrogen-bond with ligand IGP which stabilized the phenol ring, and Thr 183 also forms hydrogen-bonds with Asp 60 and Gly 61. In ligand-free state, both side-chains move more freely as there is no stable hydrogen-bond formed.

Although in most cases, one can observe entropy decrease upon ligand binding, there may be some exceptions which are of particular interest and worth further analysis. The entropy changes computed by T-Analyst provide guidance for users to pick up regions of a protein to do detail dynamic analysis. For example, T-Analyst showed an entropy gain in the second side-chain of Asp 60 in the presence of ligand, though not largely. Based on the information, we carried out further investigation near Asp 60, and found that two oxygen atoms in carboxyl group can form hydrogen-bonds with Tyr 102 and Thr 183 in both ligand-bound and ligand-free states. Interestingly, in the ligand-bound state, the two oxygen atoms of Asp 60 can flip very often but retain two stable hydrogen-bonds with Tyr 102 and Thr 183 alternatively. The presence of IGP provides a more hydrophilic environment around the carboxyl group of Asp 60; thus, the oxygen atoms can flip more freely. As a result, the local entropy increases without losing hydrogen-bonding and reducing electrostatic attraction. In contrast, when IGP is absent, the local environment around Asp 60 is mainly hydrophobic. Therefore, Asp 60 forms hydrogen-bond with Thr 183, the other hydrophilic residue, and the residues become less flexible.

### Dynamical cross-correlation between dihedral angles

T-Analyst also performs cross-correlation analysis of a trajectory. The resulting cross-correlation map allows the identification of the correlated and anti-correlated motions involved in an entire protein or user selected dihedrals. Similar to calculating standard deviations, dihedral angles used to generate a correlation plot also need to run angle correction, or discontinuities in margins (±180° or 360°/0°) can cause errors when computing their cross-correlation coefficients.

## Conclusions

MD simulations provide invaluable conformational and dynamical landmarks useful for designing new experiments and for theoretical studies. The current analysis method we describe, T-Analyst, can help exam protein motion, identify structural and dynamic features, reveal changes of flexibility in different states, and group conformations based on dihedral rotamers. Analyzing the growing MD data may be the most time-consuming step in simulation studies, and our program facilitates this work. The program can be freely downloaded from http://research.chem.ucr.edu/groups/chang/tools.htm.

## Notes

### Acknowledgments

We thank Dr. Thomas Steinbrecher for helping with amber2accent.pl. This work was supported by start-up funds and the Regents Faculty Fellowship from the University of California, Riverside, and the National Science Foundation (MCB-0919586).

### Open Access

This article is distributed under the terms of the Creative Commons Attribution Noncommercial License which permits any noncommercial use, distribution, and reproduction in any medium, provided the original author(s) and source are credited.

## References

- 1.Cui Q, Karplus M (2008) Protein Sci 17(8):1295CrossRefGoogle Scholar
- 2.Kern D, Zuiderweg ERP (2003) Curr Opin Struct Biol 13(6):748CrossRefGoogle Scholar
- 3.Tsai CJ, del Sol A, Nussinov R (2008) J Mol Biol 378(1):1CrossRefGoogle Scholar
- 4.Karplus M, McCammon JA (2002) Nat Struct Biol 9(9):646CrossRefGoogle Scholar
- 5.Gumbart J, Wang Y, Aksimentiev A, Tajkhorshid E, Schulten K (2005) Curr Opin Struct Biol 15(4):423CrossRefGoogle Scholar
- 6.Deng YQ, Roux B (2009) J Phys Chem B 113(8):2234CrossRefGoogle Scholar
- 7.May A, Sieker F, Zacharias M (2008) Curr Comput Aided Drug Des 4(2):143CrossRefGoogle Scholar
- 8.Wong CF (2008) Biochimica Et Biophysica Acta-Proteins Proteomics 1784(1):244CrossRefGoogle Scholar
- 9.Totrov M, Abagyan R (2008) Curr Opin Struct Biol 18(2):178Google Scholar
- 10.Carlson HA, McCammon JA (2000) Mol Pharmacol 57(2):213Google Scholar
- 11.Amaro RE, Baron R, McCammon JA (2008) J Comput Aided Mol Des 22(9):693CrossRefGoogle Scholar
- 12.Humphrey W, Dalke A, Schulten K (1996) J Mol Graph 14(1):33CrossRefGoogle Scholar
- 13.Brooks BR, Brooks CL, Mackerell AD, Nilsson L, Petrella RJ, Roux B, Won Y, Archontis G, Bartels C, Boresch S, Caflisch A, Caves L, Cui Q, Dinner AR, Feig M, Fischer S, Gao J, Hodoscek M, Im W, Kuczera K, Lazaridis T, Ma J, Ovchinnikov V, Paci E, Pastor RW, Post CB, Pu JZ, Schaefer M, Tidor B, Venable RM, Woodcock HL, Wu X, Yang W, York DM, Karplus M (2009) J Comput Chem 30(10):1545CrossRefGoogle Scholar
- 14.Christen M, Hunenberger PH, Bakowies D, Baron R, Burgi R, Geerke DP, Heinz TN, Kastenholz MA, Krautler V, Oostenbrink C, Peter C, Trzesniak D, Van Gunsteren WF (2005) J Comput Chem 26(16):1719CrossRefGoogle Scholar
- 15.Van der Spoel D, Lindahl E, Hess B, Groenhof G, Mark AE, Berendsen HJC (2005) J Comput Chem 26(16):1701CrossRefGoogle Scholar
- 16.Case DA, Cheatham TE, Darden T, Gohlke H, Luo R, Merz KM, Onufriev A, Simmerling C, Wang B, Woods RJ (2005) J Comput Chem 26(16):1668CrossRefGoogle Scholar
- 17.MacKerell AD, Bashford D, Bellott M, Dunbrack RL, Evanseck JD, Field MJ, Fischer S, Gao J, Guo H, Ha S, Joseph-McCarthy D, Kuchnir L, Kuczera K, Lau FTK, Mattos C, Michnick S, Ngo T, Nguyen DT, Prodhom B, Reiher WE, Roux B, Schlenkrich M, Smith JC, Stote R, Straub J, Watanabe M, Wiorkiewicz-Kuczera J, Yin D, Karplus M (1998) All-atom empirical potential for molecular modeling and dynamics studies of proteins. Volume 102Google Scholar
- 18.Chang CE, Gilson MK (2003) J Comput Chem 24(16):1987CrossRefGoogle Scholar
- 19.McClendon CL, Friedland G, Mobley DL, Amirkhani H, Jacobson MP (2009) J Chem Theory Comput 5(9):2486CrossRefGoogle Scholar
- 20.Killian BJ, Kravitz JY, Somani S, Dasgupta P, Pang YP, Gilson MK (2009) J Mol Biol 389(2):315CrossRefGoogle Scholar
- 21.Crowley MF, Williamson MJ, Walker RC (2009) Int J Quantum Chem 109(15):3767CrossRefGoogle Scholar
- 22.Shao JY, Tanner SW, Thompson N, Cheatham TE (2007) J Chem Theory Comput 3:2312CrossRefGoogle Scholar
- 23.Phillips JC, Braun R, Wang W, Gumbart J, Tajkhorshid E, Villa E, Chipot C, Skeel RD, Kale L, Schulten K (2005) Scalable molecular dynamics with NAMD. Volume 26Google Scholar
- 24.R Development Core Team (2009). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0, URL http://www.R-project.org
- 25.Chang C-EA, McLaughlin WA, Baron R, Wang W, McCammon JA (2008) Proc Natl Acad Sci USA 105(21):7456CrossRefGoogle Scholar
- 26.Levy RM, Karplus M, Kushick J, Perahia D (1984) Macromolecules 17(7):1370CrossRefGoogle Scholar
- 27.Meirovitch H, Cheluvaraja S, White RP (2009) Curr Protein Pept Sci 10(3):229CrossRefGoogle Scholar
- 28.Fatmi MQ, Ai R, Chang CEA (2009) Biochemistry 48(41):9921CrossRefGoogle Scholar
- 29.Wang JM, Wang W, Kollman PA, Case DA (2006) Automatic atom type and bond type perception in molecular mechanical calculations. Volume 25Google Scholar
- 30.Ngo H, Kimmich N, Harris R, Niks D, Blumenstein L, Kulik V, Barends TR, Schlichting I, Dunn MF (2007) Allosteric regulation of substrate channeling in tryptophan synthase: Modulation of the L-Serine reaction in stage I of the ss-reaction by alpha-site ligands. Volume 46Google Scholar
- 31.Barends TRM, Domratcheva T, Kulik V, Blumenstein L, Niks D, Dunn MF, Schlichting I (2008) Chembiochem 9(7):1024CrossRefGoogle Scholar
- 32.Berman HM, Battistuz T, Bhat TN, Bluhm WF, Bourne PE, Burkhardt K, Iype L, Jain S, Fagan P, Marvin J, Padilla D, Ravichandran V, Schneider B, Thanki N, Weissig H, Westbrook JD, Zardecki C (2002) The Protein Data Bank. Volume 58Google Scholar
- 33.Onufriev A, Bashford D, Case DA (2000) J Phys Chem B 104(15):3712CrossRefGoogle Scholar
- 34.Hornak V, Okur A, Rizzo RC, Simmerling C (2006) Proc Natl Acad Sci USA 103(4):915CrossRefGoogle Scholar
- 35.Damm KL, Carlson HA (2006) Biophys J 90(12):4558CrossRefGoogle Scholar
- 36.Okazaki KI, Takada S (2008) Dynamic energy landscape view of coupled binding and protein conformational change: Induced-fit versus population-shift mechanisms. Volume 105Google Scholar
- 37.Kuhlman B, Baker D (2000) Native protein sequences are close to optimal for their structures. Volume 97Google Scholar
- 38.Grant BJ, Rodrigues APC, ElSawy KM, McCammon JA, Caves LSD (2006) Bio3d: an R package for the comparative analysis of protein structures. Volume 22Google Scholar