Abstract
A method based on a perfect rigid-plastic body model is developed to analyze the dynamic behavior of hinged or clamped polygonal plates that have a perfectly rigid insert and rest on a viscoelastic foundation with supports. The plate is subject to an arbitrary blast load of high intensity uniformly distributed over the plate surface. Two cases of plate deformation are examined. In each of the cases, equations of motion are derived and realization conditions are analyzed. Analytic expressions for the deformation time and the maximum residual deflection are derived in the case of an arbitrary load of medium intensity and in the case of high-intensity load described by a rectangular function. Examples of numerical solutions are given
Similar content being viewed by others
References
H. G. Hopkins and W. Prager, “On the dynamics of plastic circular plates,” J. Appl. Math. Phys. (ZAMP), No. 5, 317–330 (1954).
M. I. Erkhov, Theory of Perfectly Plastic Bodies and Structures [in Russian], Nauka, Moscow (1978).
K. L. Komarov and Yu. V. Nemirovskii, Dynamics of Rigid-Plastic Structural Members [in Russian], Nauka, Novosibirsk (1984).
V. N. Mazalov and Yu. V. Nemirovskii, “Dynamics of thin-walled plastic structures,” in: Problems of Dynamics of Elastoplastic Media, Advances in Foreign Science. Mechanics [in Russian], Issue 5, Mir, Moscow (1975), pp. 155–247.
Yu. V. Nemirovsky and T. P. Romanova, “Dynamic behavior of doubly connected polygonal plastic slabs,” Int. Appl. Mech., 23, No. 5, 458–464 (1987).
Yu. V. Nemirovskii, T. P. Romanova, et al., “Dynamic bending of plastic polygonal plates,” Prikl. Mekh. Tekhn. Fiz., No. 4, 149–157 (1988).
Yu. V. Nemirovskii, T. P. Romanova, et al., “Optimization of the dynamic deformation of plates with compound boundary,” Prikl. Mekh. Tekhn. Fiz., 42, No. 1, 170–178 (2001).
Yu. V. Nemirovskii and T. P. Romanova, “Dynamic plastic deformation of curvilinear plates,” Int. Appl. Mech., 37, No. 12, 1568–1578 (2001).
Yu. V. Nemirovskii, T. P. Romanova, et al., “Plastic deformation of doubly coupled plates with curvilinear boundary under dynamic loads,” in: Important Problems of Dynamics and Strength in Theoretical and Applied Mechanics [in Russian], Tekhnoprint, Minsk (2001), pp. 515–525.
Yu. V. Nemirovsky, T. P. Romanova et al., “Modeling and analysis of the forming of thin-walled structures with smooth convex boundaries,” in: Proc. 20th Int. Conf. on the Theory of Shells and Plates [in Russian], Izd. Nizh.-Novgorod. Gos. Univ., N. Novgorod (2002), pp. 231–239.
Yu. V. Nemirovsky, T. P. Romanova, et al., “Damage of flat barriers with nonconcave boundaries under blast loads,” Nauch. Vestn. Novosib. Gos. Tekhn. Univ., No. 2, 77–85 (2002).
Yu. V. Nemirovskii, T. P. Romanova, et al., “Dynamic plastic damage of simply and doubly connected elliptic plates,” Prikl. Mekh. Tekhn. Fiz., 43, No. 4, 142–154 (2002).
Yu. V. Nemirovskii, T. P. Romanova, et al., “Dynamics of plastic plates in the form of irregular ovals,” in: Proc. Int. School on Modern Problems of Mechanics and Applied Mathematics (June 4–8, 2002, Voronezh) [in Russian], part 1, VGU, Voronezh (2003), pp. 182–196.
Yu. V. Nemirovskii and T. P. Romanova, “Dynamic behavior of rigid-plastic sector plates,” Int. Appl. Mech., 40, No. 4, 440–447 (2004).
A. L. Florence, “Annular plate under a transverse line impulse,” AIAA J., 3, No. 9, 202–211 (1965).
A. L. Florence, “Clamped circular rigid-plastic plates under blast loading,” Trans. ASME, J. Appl. Mech., Ser. E, 33, No. 2, 11–17 (1966).
I. I. Anik'ev, M. I. Mikhailova, and E. A. Sushchenko, “Interaction of thin perforated plates and weak shock waves,” Int. Appl. Mech., 42, No. 11, 1307–1310 (2006).
I. I. Anik'ev, M. I. Mikhailova, and E. A. Sushchenko, “Nonstationary deformation of an elastic plate with a notch under the action of a shock wave,” Int. Appl. Mech., 43, No. 11, 1264–1269 (2007).
S. A. Kaloerov and A. B. Mironenko, “Analyzing the viscoelastic state of a plate with elliptic or linear elastic inclusions,” Int. Appl. Mech., 43, No. 2, 198–208 (2007).
M. P. Malezhik, I. S. Chernyshenko, and G. P. Sheremet, “Diffraction of stress waves by a free or reinforced hole in an orthotropic plate,” Int. Appl. Mech., 43, No. 7, 767–771 (2007).
Author information
Authors and Affiliations
Additional information
__________
Translated from Prikladnaya Mekhanika, Vol. 44, No. 1, pp. 99–110, January 2008.
Rights and permissions
About this article
Cite this article
Nemirovskii, Y.V., Romanova, T.P. Behavior of rigid-plastic polygonal plates with a rigid insert under blast loads. Int Appl Mech 44, 81–90 (2008). https://doi.org/10.1007/s10778-008-0022-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10778-008-0022-5