Advertisement

International Applied Mechanics

, Volume 43, Issue 6, pp 662–669 | Cite as

Stability of conical shells made of composites with one plane of elastic symmetry

  • V. M. Trach
Article

Abstract

The paper proposes a technique for stability analysis of anisotropic laminated thin shells of revolution made of a composite with one plane of symmetry. The technique is used for numerical analysis of truncated cones made of binder-impregnated filaments continuously wound along geodesic lines. It is shown that the effect of low symmetry on the critical loads depends not only on the number of laminas, but also on the cone angle

Keywords

laminated shell of revolution stability external pressure carbon plastic shell effect of boundary conditions 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    S. A. Ambartsumyan, General Theory of Anisotropic Shells [in Russian], Nauka, Moscow (1974).Google Scholar
  2. 2.
    G. A. Vanin and N. P. Semenyuk, Stability of Composite Shells with Imperfections [in Russian], Naukova Dumka, Kyiv (1987).Google Scholar
  3. 3.
    Ya. M. Grigorenko and A. T. Vasilenko, Theory of Shells of Varying Stiffness [in Russian], Naukova Dumka, Kyiv (1981).Google Scholar
  4. 4.
    Ya. M. Grigorenko and N. N. Kryukov, Numerical Solutions to Static Problems for Flexible Laminated Shells with Variable Parameters [in Russian], Naukova Dumka, Kyiv (1988).Google Scholar
  5. 5.
    V. I. Korolev, Laminated Anisotropic Plates and Shells Made of Reinforced Plastic [in Russian], Mashinostroenie, Moscow (1965).Google Scholar
  6. 6.
    V. I. Mikisheva, “Optimal winding of filament-wound reinforced plastic shells designed to resist buckling under external pressure or axial compression,” Mech. Comp. Mater., 4, No. 5, 696–704 (1968).Google Scholar
  7. 7.
    V. D. Kubenko, A. É. Babaev, E. I. Bespalova, et al., Dynamics of Structural Members, Vol. 9 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (1999).Google Scholar
  8. 8.
    A. N. Guz, I. Yu. Babich, D. V. Babich, et al., Stability of Structural Members, Vol. 10 of the 12-volume series Mechanics of Composite Materials [in Russian], A.S.K., Kyiv (2001).Google Scholar
  9. 9.
    V. V. Vasilev (ed.), V. D. Protasov, V. V. Bolotin, et al., Handbook of Composite Materials [in Russian], Mashinostroenie, Moscow (1990).Google Scholar
  10. 10.
    A. O. Rasskazov, V. M. Trach, and V. N. Gupalyuk, “Stability of multilayered shells of revolution with allowance for geometric nonlinearity of the subcritical state,” Int. Appl. Mech., 40, No. 6, 589–594 (1999).CrossRefGoogle Scholar
  11. 11.
    R. B. Rikards and G. A. Teters, Stability of Composite Shells [in Russian], Zinatne, Riga (1974).Google Scholar
  12. 12.
    G. Lubin (ed.), Handbook of Composites, Van Nostrand Reinhold Company, New York (1982).Google Scholar
  13. 13.
    E. I. Bespalova, “Free vibrations of spatial bodies with elastic properties of low symmetry,” Int. Appl. Mech., 38, No. 1, 90–94 (2002).CrossRefGoogle Scholar
  14. 14.
    N. P. Semenyuk, Yu. Ya. Dushek, and V. M. Trach, “Stability of cylindrical composite shells under torsion,” Int. Appl. Mech., 41, No. 10, 1170–1176 (2005).CrossRefGoogle Scholar
  15. 15.
    N. P. Semenyuk and V. M. Trach, “Stability of axially compressed cylindrical shells made of reinforced materials with specific fiber orientation within each layer,” Int. Appl. Mech., 42, No. 3, 318–324 (2006).CrossRefGoogle Scholar
  16. 16.
    N. P. Semenyuk, V. M. Trach, and A. V. Podvornyi, “Stability of cylindrical shells made of fibrous composites with one symmetry plane,” Int. Appl. Mech., 41, No. 6, 682–688 (2005).CrossRefGoogle Scholar
  17. 17.
    V. M. Trach, “Stability of cylindrical shells with one plane of elastic symmetry under axial compression and torsion,” Int. Appl. Mech., 42, No. 8, 943–947 (2006).CrossRefGoogle Scholar
  18. 18.
    V. M. Trach and A. V. Podvornyi, “Stability of laminated shells made of materials with one plane of elastic symmetry,” Int. Appl. Mech., 40, No. 5, 573–579 (2004).CrossRefGoogle Scholar

Copyright information

© Springer Science+Business Media, Inc. 2007

Authors and Affiliations

  • V. M. Trach
    • 1
  1. 1.National University of Water Management and Natural Resource UseRivneUkraine

Personalised recommendations