The alloys used to manufacture blades and vanes for modern gas turbines operating in Russia are discussed. The experience of the VTI in justifying the selection of materials for blades of gas turbines and in investigating cases of damage to blading is described.
Similar content being viewed by others
References
P. W. Schilke, Advanced Gas Turbine Materials and Coatings, GER-3569G, GE Energy (2004) (http://site.ge-energy.com/prod_serv/products/tech_docs/en/downloads/ger3569g.pdf).
V. V. Rtishchev, V. V. Krivonosova, Yu. M. Sundukov, V. E. Mikhailov, and M. S. Zolotogorov, “Cooled turbine blades in the GTÉ-65 gas turbine power unit,” Power Techn. Eng., 43(6), 376 – 381 (2009).
Yu. E. Kvasnitskii, O. V. Klyass, and V. A. Kreshchenko, “Optimization of the thermal-treatment conditions for large ChS88U-VI alloy castings for GTG-110 moving blades,” in: Proc. Conf.at Gas Turbine Research & Production Complex Zorya-Mashproekt [in Russian], Nikolaev (2004), pp. 91 – 94.
E. V. Monastyrskaya, E. I. Morozova, and Yu. B. Vlasov, “Structure, phase composition, and properties of corrosion-resistant refractory alloy ChS88U,” Metal Sci. Heat Treat., 48(7), 368 – 373 (2006).
A. M. Klypina, L. D. Chistyakova, and D. A. Kazanskii, “Estimating the quality of metal in cast working blades made of the nickel alloy ChS88U-VI,” Power Techn. Eng., 43(2), 108 – 113 (2009).
D. A. Kazanskii and V. I. Gladshtein, “Determination of metal life for new nickel alloy ÉP800-VD rotor blades,” Power Techn. Eng., 47(4), 296 – 300 (2013).
A. M. Klypina, L. D. Chistyakova, D. A. Kazanskii, and A. V. Magdalinina, “Improving the reliability of cast ChS70U-VI alloy first-stage blades of Turboatom GTÉ-45-3,” Énergetik, No. 11, 35 – 36 (2006).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Élektricheskie Stantsii, No. 6, June 2016, pp. 34 – 40.
Rights and permissions
About this article
Cite this article
Kazanskii, D.A. Problems of Manufacture and Operation of First-Stage Blades and Vanes of Gas Turbines. Power Technol Eng 50, 429–434 (2016). https://doi.org/10.1007/s10749-016-0726-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10749-016-0726-3