Advertisement

Power Technology and Engineering

, Volume 49, Issue 3, pp 206–211 | Cite as

Calculating the Dynamic Characteristics of a Boiler-Utilizer at the Novogor’kovskaya Heat and Electric Power Plant

  • K. A. Pleshanov
  • K. V. Sterkhov
  • M. N. Zaichenko
Article

The joint experience of the Machine-Building Factory of Podolsk and the Moscow Power Engineering Institute in developing startup technology for the PK-85 boiler-utilizer (heat recovery steam generator) at the Novogor’kovskaya heat and electric power plant is discussed. Criteria for the operational reliability of the components of the boiler-utilizer under transient conditions are formulated. The effect of regulator controls during startup of the boiler from different thermal states on its dynamic characteristics is studied computationally. Recommendations for the startup of boilers are developed on the basis of these studies and the proposed criteria.

Keywords

boiler-utilizer startup transient process dynamics startup scheme startup technology Boiler Designer operational reliability low-cycle fatigue drum criterion 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Rules for Technical Operation of Electric Power Plants and Grids in the Russian Federation [in Russian], DEAN, St. Petersburg (2012).Google Scholar
  2. 2.
    V. A. Dvoinishnikov and E. A. Popov, “The stressed state of the high-pressure drum during startup of the boiler-utilizer of a combined cycle unit,” Teploénergetika, No. 8 (2010).Google Scholar
  3. 3.
    V. Yu. Latish and K. A. Pleshanov, “Study of the heating of the drum and operation of the evaporator system of a PK-79 boilerutilizer at the Chelyabinsk heating and electric power plant during startup from various thermal states,” in: Modern Power Generating Technologies — the Basis of Increased Reliability, Efficiency, and Safety of Power Plant Equipment: A Collection of Talks at the Specialized Scientific-Practical Conference of Young Specialists [in Russian], Izd. VTI, Moscow (2012).Google Scholar
  4. 4.
    V. A. Dvoinishnikov and E. A. Popov, “Effect of the dimensions and initial temperature of the drum of the boiler-utilizer of a steam-gas unit on its stressed state during startup,” Teploénergetika, No. 11 (2010).Google Scholar
  5. 5.
    K. A. Pleshanov, Yu. V. Latish, and V. P. Knyaz’kov, A study of startup in the PK-85 boiler at the Novogor’kovskaya heat and electric power plant,” in: A Package of Applied Programs for Design of Thermal Power-Plant Equipment: Proc. of the Int. Sci.-Pract. Conf.Boiler Designer-2014” [in Russian], Torus Press, Moscow (2014).Google Scholar
  6. 6.
    State Standard GOST R 55682.3–2013 / EN 12952-3:2001. Boilers, Water-Pipe and Boiler Auxiliary Equipment. Part 3. Construction and Design of Components Operating under Pressure [in Russian].Google Scholar
  7. 7.
    M. A. Izyumov, V. M. Supranov, P. V. Roslyakov, and A. V. Novikov, “A study of the feasibility of shifting TP-92 boilers at the Yaivinskaya GRÉS power plant to non-design coals,” Teploénergetika, No. 9 (2008).Google Scholar
  8. 8.
    V. M. Supranov, M. A. Izyumov, and P. V. Roslyakov, “A study of the feasibility of running the TPE-208 boiler in unit No. 1 of the Smolensk GRÉS power plant on non-design coals,” Teploénergetika, No. 1 (2011).Google Scholar
  9. 9.
    V. T. Sidorkin, A. N. Tugov, V. M. Supranov, M. A. Izyumov, A. V. Sokolov, S. N. Kolesnik, V. N. Nikiforov, and K. G. Golub’, “Experience with rebuilding BKZ-75-39 FSl boilers for firing with shale processing products,” Énergetik, No. 2 (2014).Google Scholar
  10. 10.
    V. M. Supranov, V. A. Batorshin, A. V. Shtegman, and D. A. Mel’nikov, “Study of the possibility and suitability of running a Pp-1900-25-570KT boiler in an oxygen fuel burning mode,” Teploénergetika, No. 8 (2012).Google Scholar
  11. 11.
    V. M. Supranov, G. A. Ryabov, and D. A. Mel’nikov, “Study of the possibility and suitability of running a Pp-1000-25-585 boiler with a circulating boiling layer in an oxygen fuel burning mode,” Teploénergetika, No. 7 (2011).Google Scholar
  12. 12.
    M. N. Zaichenko, I. L. Ionkin, and V. M. Supranov, “Modelling the operation of steam and water-heating boilers together with a condenser unit,” in: A Package of Applied Programs for Design of Thermal Power-Plant Equipment. Proc. Int. Sci.-Pract. Conf.Boiler Designer-2014” [in Russian], Torus Press, Moscow (2014).Google Scholar
  13. 13.
    P. V. Roslyakov, K. A. Pleshanov, and K. V. Sterkhov, “Study of natural circulation in the evaporator of a boiler-utilizer with horizontal piping,” Teploénergetika, No. 7 (2014).Google Scholar
  14. 14.
    K. A. Pleshanov and K. V. Sterkhov, Calculating the circulation of a Pr-76-3.3-415 boiler-utilizer,” in: A Package of Applied Programs for Design of Thermal Power-Plant Equipment. Proc. Int. Sci.-Pract. Conf.Boiler Designer-2014” [in Russian], Torus Press, Moscow (2014).Google Scholar
  15. 15.
    A. L. Kovalev, N. S. Leleev, and T. V. Vilenskii, Steam Generators: A College Textbook, Énergoatomizdat, Moscow (1985).Google Scholar
  16. 16.
    V. I. Trembovlya and I. M. Meksin (eds.), Experience with Startup and Operation of 150 MW Units at the Pridnestrovskaya GRÉS Power Plant (1960 – 1961 ) [in Russian], Izd. ORGRÉS, Moscow (1962).Google Scholar
  17. 17.
    M. V. Meiklyar, Modern TKZ Boiler Units [in Russian], Énergiya, Moscow (1978).Google Scholar
  18. 18.
    A. A. Bessarabov, “Advanced methods for calculating the durability of perforated components in power plant equipment,” Tekhnol. Mashinostr., No. 7 (2007).Google Scholar
  19. 19.
    V. I. Gombolevskii, G. I. Doverman, and A. S. Shabunin, “Optimization of a scheme and regimes for heating of steam lines in steam-gas units using the ‘Boiler Designer’ program package,” in: A Package of Applied Programs for Design of Thermal Power-Plant Equipment. Proc. Int. Sci.-Pract. Conf.Boiler Designer-2014” [in Russian], Torus Press, Moscow (2014).Google Scholar

Copyright information

© Springer Science+Business Media New York 2015

Authors and Affiliations

  • K. A. Pleshanov
    • 1
    • 2
  • K. V. Sterkhov
    • 3
  • M. N. Zaichenko
    • 4
  1. 1.National Research University “Moscow Power Engineering Institute” (NIU “MÉI”)MoscowRussia
  2. 2.JSC “Machine-Building Factory of Podolsk”PodolskRussia
  3. 3.JSC “Machine-Building Factory of Podolsk” (JSC “ZiO”)PodolskRussia
  4. 4.National Research University “Moscow Power Engineering Institute”MoscowRussia

Personalised recommendations