A batch composition for facing ceramic based on low-plasticity clay with an additive containing boric acid and lithium carbonate as fluxes as well as titanium dioxide as a strengthening additive was developed. The influence of the additives on the formation of the structure, composition, and basic operational properties of the obtained ceramic was investigated. It is shown that it is possible to produce a ceramic material possessing the property of self-glazing of the surface of articles and meeting the requirements of articles for the facing of the socles of buildings and structures.
Similar content being viewed by others
Notes
Here and below, the weight content, %.
References
V. A. Gurieva, Designing the Production of Building Ceramics Products [in Russian], OGU, Orenburg (2013).
A. A. Markova, E. S. Pikalov, O. G. Selivanov, et al., “Complex recycling of waste in the Vladimir Region in the production of high-strength building ceramics from local low-plasticity clay,” Ékol. Prom. Proiz-va, No. 3(95), 14 – 17 (2016).
A. A. Vorob’eva, V. N. Shakhova, E. S. Pikalov, et al., “Production of facing ceramic with a glazing effect based on low-plastic clay and technogenic waste from Vladimir Oblast,” Steklo Keram., 75(1 – 2), 51 – 54 (2018); A. A. Vorob’eva, V. N. Shakhova, E. S. Pikalov, et al., “Production of facing ceramic with a glazing effect based on low-plastic clay and technogenic waste from Vladimir Oblast,” Glass Ceram., 75(1 – 2), 51 – 54 (2018).
I. A. Vitkalova, A. S. Torlova, E. S. Pikalov, and O. G. Selivanov, “Use of waste containing heavy metals for the production of acid-resistant ceramics with the self-glazing effect,” Ékol. Prom. Proiz-va, No. 2, 2 – 6 (2018).
A. S. Torlova, I. A. Vitkalova, E. S. Pikalov, and O. G. Selivanov, “Development of a batch composition for producing heat-resistant ceramics,” Sovr. Naukoemkie Tekhnol., No. 10, 126 – 130 (2018), URL: http://www.toptechnologies.ru/ru/article/view?id=37207
O. V. Kichkailo and I. A. Levitskii, “Effect of boron-containing additives on the properties lithium heat-resistant ceramics,” Tr. BSTU, Khim. Tekhnol. Neorg. Veshchestv, 1(3), 74 – 79 (2010).
V. K. Marin, Yu. S. Kuznetsov, and S. Yu. Novokreschenova, “Experience in the disposal of industrial waste in the Penza region,” Ékologiya Prom-st’, No. 5, 28 – 33 (2005).
A. N. Shimanskaya and I. A. Levitskii, “Features of the formation of titanium-containing glaze coatings of floor tiles,” Steklo Keram., No. 3, 24 – 30 (2016); A. N. Shimanskaya and I. A. Levitskii, “Formation particularities of titanium-containing glaze coatings for floor tiles,” Glass Ceram., 73(3 – 4), 94 – 99 (2016).
G. G. Santos, F. S. Serbena, V. M. Fokin, and E. D. Zanotto, “Microstructure and mechanical properties of nucleant-free Li2O–CaO–SiO2 glass-ceramics,” Acta Mater., 130, 347 – 360 (2017).
O. V. Kichkailo and I. A. Levitskii, “Production of heat-resistant ceramic materials in the Li2O–Al2O3–SiO2 system,” Ogneup. Tekh. Keram., No. 11 – 12, 50 – 60 (2013).
Z. R. Ismagilov, V. V. Kuznetsov, L. B. Okhlopkova, et al., Oxides of Titanium, Cerium, Zirconium, Yttrium, Aluminum: Properties, Applications, and Production [in Russian], Izd. SO RAN, Novosibirsk (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 1, pp. 13 – 18, January, 2019.
Rights and permissions
About this article
Cite this article
Shakhova, V.N., Berezovskaya, A.V., Pikalov, E.S. et al. Development of Self-Glazing Ceramic Facing Material Based on Low-Plasticity Clay. Glass Ceram 76, 11–15 (2019). https://doi.org/10.1007/s10717-019-00123-4
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-019-00123-4