A novel method of controlling the strength characteristics of porous ceramic composites in the system abrasive grain – binder – pores so as to obtain a composite maximizing the serviceability of grinding tools fabricated from the ceramic was developed. The experimental and mathematical dependences of these characteristics, which comprise the basis of the method proposed herein, are presented. An example of the implementation of the method in tool fabrication and operation is given.
Similar content being viewed by others
References
N. S. Rakhmarova, Investigation of the Effectiveness of Circular External Grinding Using High-Porosity Disks and Disks Made from Monocorundum, Author’s Abstract of Candidate’s Thesis [in Russian], NIIAT, Moscow (1951).
V. I. Kudryukov and A. A. Andreev, “Method of determining the specific fracture energy of ceramic compositions in the system abrasive grain–ceramic binder–pores,” Ogneup. Tekh. Keram., No. 4 – 5, 27 – 31 (2016).
V. I. Kudryukov and A. A. Andreev, “Dependence of the specific energy of fracture of ceramic abrasive composites in the system grain–binder–pores on their structural parameters,” Steklo Keram., No. 12, 35 – 39 (2016); “Dependence of the specific energy of fracture of ceramic abrasive composites in the system kernel binder-pores on their structure parameters,” Glass Ceram., 73(11 – 12), 465 – 469 (2016).
N. E. Filonenko, Petrography of Ceramic Binders, Author’s Abstract of Doctoral’s Thesis [in Russian], Leningrad (1946).
J. Sedetskii, Mechanics of Composite Materials, Mir, Moscow (1978) [Composite Materials, Vol. 2].
P. Brautman and R. Krok, Fracture and Fatigue, Mir, Moscow (1970) [Composite Materials, Vol. 5].
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 12, pp. 25 – 30, December, 2017.
Rights and permissions
About this article
Cite this article
Kurdyukov, V.I., Andreev, A.A. Hardness Control of Porous Ceramic Compositions in the System Abrasive Grain – Binder – Pores. Glass Ceram 74, 444–449 (2018). https://doi.org/10.1007/s10717-018-0013-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-018-0013-x