Advertisement

Glass and Ceramics

, Volume 73, Issue 3–4, pp 103–106 | Cite as

Shrink-Free Face Material Based on Cullet and Colemanite

  • E. S. Dorokhova
  • F. E. Zhernovoi
  • N. F. Zhernovaya
  • I. A. Izotova
  • V. S. Bessmertnyi
  • E. E. Tarasova
Article

An energy-conserving technology for shrink-free face materials is proposed and tested. It is based on the superposition and cancellation of two opposing deformation effects in the sintering process: volumetric shrinkage and foaming with formation of a microporous structure. The necessary conditions for implementing the proposed technology are indicated.

Key words

cullet colemanite sintering shrinkage foaming viscosity microporous structure 

References

  1. 1.
    N. I. Min’ko, V. N. Bolotin, and N. F. Zhernovaya, “Technological, energy, and environmental aspects of collecting and recycling of cullet,” Steklo Keram., No. 5, 3 – 5 (1999); N. I. Min’ko, V. N. Bolotin, and N. F. Zhernovaya, “Technological, energy, and environmental aspects of collecting and recycling of cullet,” Glass Ceram., 56(5 – 6), 131 – 133 (1999).Google Scholar
  2. 2.
    T. K. Pavlushkina and N. G. Kisilenko, “Cullet use in the production of building materials,” Steklo Keram., No. 5, 27 – 34 (2011); T. K. Pavlushkina and N. G. Kisilenko, “Cullet use in the production of building materials,” Glass Ceram., 68(5 – 6), 162 – 168 (2011).Google Scholar
  3. 3.
    Yu. P. Gorlov, “Efficient use of cullet,” in: Collection of Works of the I. V. Kuibyshev Moscow Civil Engineering Institute [in Russian], MISI, Moscow (1989).Google Scholar
  4. 4.
    Yu. P. Gorlov, A. P. Merkin, and M. I. Zeifman, High-Temperature Concrete Based on Compositions Made from Natural Technogenic Glasses [in Russian], Stroiizdat, Moscow (1986).Google Scholar
  5. 5.
    A. A. Ketov, I. S. Puzanov, and D. V. Saulin, “Experience in the production of foam-glass materials from cullet,” Stroit. Mater., No. 3, 70 – 72 (2007).Google Scholar
  6. 6.
    S. N. Zotov, “Investigation of the influence of different forms of cullet on the properties of ceramic articles,” Tr. NIIStroikeramiki, No. 58, 24 – 25 (1986).Google Scholar
  7. 7.
    B. K. Demidovich, “Production of penodekor — a facing materials from foamed glass,” Ékspress-Inform., Stekol’naya Prom-st’, No. 9, 6 (1985).Google Scholar
  8. 8.
    V. F. Lyasin and P. D. Sarkisov, Glass and Glass Ceramic Facing Materials [in Russian], Vyssh. Shkola, Moscow (1988).Google Scholar
  9. 9.
    N. I. Min’ko, N. F. Zhernovaya, V. I. Onishchuk, et al., “Construction materials based on cullet,” Steklo Keram., No. 1, 4 – 6 (1999); N. I. Min’ko, N. F. Zhernovaya, V. I. Onishchuk, et al., “Construction materials based on cullet,” Glass Ceram., 56(1 – 2), 5 – 7 (1999).Google Scholar
  10. 10.
    V. I. Onishchuk, N. F. Zhernovaya, and V. A. Doroganov, “Mosaic smalt for construction,” Stroit. Mater., No. 8, 13 – 15 (2007).Google Scholar
  11. 11.
    N. F. Zhernovaya, E. A. Doroganov, F. E. Zhernovoi, and I. N. Stepina, “Investigation of materials obtained by sintering in the system clay – cullet,” Vestn. BGTU im. V. G. Shukhova, No. 1, 20 – 23 (2013).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • E. S. Dorokhova
    • 1
  • F. E. Zhernovoi
    • 1
  • N. F. Zhernovaya
    • 2
  • I. A. Izotova
    • 1
  • V. S. Bessmertnyi
    • 1
  • E. E. Tarasova
    • 2
  1. 1.V. G. Shukhov Belgorod State Technological University (BGTU)BelgorodRussia
  2. 2.Belgorod University of Cooperation, Economics, and LawBelgorodRussia

Personalised recommendations