Advertisement

Glass and Ceramics

, Volume 69, Issue 1–2, pp 71–74 | Cite as

Effect of iron oxides on the proneness of synthesized basaltic metals toward fiber formation

  • O. S. Tatarintseva
  • N. N. Khodakova
  • T. K. Uglova
ARTIFICIAL STONE

The results of experimental studies of the physical-chemical parameters of basaltic glass synthesized by reduction melting of batch from dolerite and limestone and differing by the total content of bi- and trivalent iron are presented. It is shown that as the iron oxide content in the melt decreases the capability of the melt to form continuous fibers decreases because the structure of the glass breaks down and the fibers become weaker.

Key words

rocks synthetic basalts reduction melting deferrized melts glass viscosity crystallization and wetting powers temperature interval of fiber production 

References

  1. 1.
    V. A. Kutolin and V. A. Shirokikh, “Effect of iron oxides in basaltic raw materials on the quality of basaltic cotton and continuous fibers,” in: Reports at the 5th Intern. Scientific and Applications Conf. on Engineering and Technology of the Manufacture of Heat Insulation from Mineral Raw Materials, Belokurikha [in Russian], TsÉI Khimmash, Moscow (2005), pp. 31 – 37.Google Scholar
  2. 2.
    N. M. Pavlushkina (ed.), Practical Course in Glass and Pyroceramics Technology [in Russian], Izd. Lit. po Stroitel’stvu, Moscow (1970).Google Scholar
  3. 3.
    I. I. Kitaigorodskii (ed.), Technology of Glass [in Russian], Gosstroiizdat, Moscow (1969).Google Scholar
  4. 4.
    D. D. Dzhigiris, M. F. Makhova, V. D. Gorobinskaya, and L. N. Bombyr’, “Continuous fiber,” Steklo Keram., No. 9, 14 – 16 (1983); D. D. Dzhigiris, M. F. Makhova, V. D. Gorobinskaya, and L. N. Bombyr’, “Continuous basalt fiber,” Glass Ceram., 40(9), 467 – 470 (1983).Google Scholar
  5. 5.
    D. D. Dzhigiris and M. F. Makhova, Principles of Manufacture of Basaltic Fibers and Articles [in Russian], Teploénergetik, Moscow (2002).Google Scholar
  6. 6.
    M. S. Aslanova, “Effect of different factors on the mechanical properties of glass fibers,” Steklo Keram., No. 11, 10 – 15 (1960); M. S. Aslanova, “Effect of different factors on the mechanical properties of glass fibers,” Glass Ceram., 17(11), 563 – 569 (1983).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2012

Authors and Affiliations

  • O. S. Tatarintseva
    • 1
  • N. N. Khodakova
    • 1
  • T. K. Uglova
    • 1
  1. 1.Institution of the Russian Academy of Sciences, Institute of Chemical-Energy TechnologiesSiberian Branch of the Russian Academy of SciencesBiiskRussia

Personalised recommendations