It is shown that sludges due to alkali etching and used as a grog additive in ceramic mixes based on crude kaolin clay make it possible to obtain clinker articles of high quality.
Similar content being viewed by others
References
E. S. Abdrakhimova, I. V. Kovkov, D. Yu. Denisov, and V. Z. Abdrakhimov, Physical-Chemical Processes in Sintering of Clay Materials with Different Chemical-Mineralogical Composition [in Russian], Center for Advanced Development, Samara (2008).
E. S. Abdrakhimova and V. Z. Abdrakhimov, “Ceramic mix for obtaining acid-resistant materials, RU Patent No. 2385304, C1, C04B 33/132, published March 27, 2010,” Byul. Izobr. Polezn. Modeli, No. 9 (2010).
I. V. Kovkov and V. Z. Abdrakhimov, “Electron microscope investigation of the phase composition of ceramic brick obtained from baddeleyite clay, ash slag, and phosphorus slag at different sintering temperatures,” Bashkirskii Khim. Zh., 8(2), 78 – 79 (2008).
V. Z. Abdrakhimov, “Role of iron oxide in the formation of structure of ceramic materials,” Izv. Vysh. Ucheb. Zaved., Stroitel’stvo, No. 2, 31 – 37 (2009).
B. I. Vinogradov, Petrography of Artificial Porous Fillers [in Russian], Literatura po stroitel’stvy, Moscow (1972).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Steklo i Keramika, No. 1, pp. 21 – 23, January, 2011.
Here and below — content by weight.
Rights and permissions
About this article
Cite this article
Kulikov, V.A., Kovkov, I.V. & Abdrakhimov, V.Z. Clinker brick based on crude kaolin and sludges from alkali etching. Glass Ceram 68, 22–24 (2011). https://doi.org/10.1007/s10717-011-9313-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10717-011-9313-0