Advertisement

Glass and Ceramics

, Volume 62, Issue 11–12, pp 379–380 | Cite as

Technological parameters of briquetting batch for foam glass production

  • M. S. Garkavi
  • N. S. Kulaeva
Article
  • 62 Downloads

Abstract

A method for preliminary briquetting foam glass batch has been developed which not only can simplify the production process but also modify the foam glass parameters by controlling the parameters of briquette production. The parameters for preparing briquettes for foam glass based on various technological binders and the optimum binder contents are identified. It is established that denser briquettes yield foam glass of lower density.

Keywords

Foam Production Process Technological Parameter Briquette Binder Content 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    N. N. Kruglitskii, Principles of Physicochemical Mechanics, Part 3 [in Russian], Vishcha Shkola, Kiev (1977).Google Scholar
  2. 2.
    V. V. Timashev, L. M. Sulimenko, and B. S. Al’bats, Agglomeration of Powdered Silicate Materials [in Russian], Stroiizdat, Moscow (1978).Google Scholar
  3. 3.
    V. A. Lotov and E. V. Krivenkova, “Kinetics of formation of porous structure in foam glass,” Steklo Keram., No. 3, 14–17 (2002Google Scholar
  4. 4.
    V. A. Lotov, “Control of structure formation in porous materials,” Stroit. Mater., No. 9, 26–28 (2000Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2005

Authors and Affiliations

  • M. S. Garkavi
    • 1
  • N. S. Kulaeva
    • 1
  1. 1.G. I. Nosov State Technical UniversityMagnitogorskRussia

Personalised recommendations