Correction to: Single Helix Screw Pile Behavior Under Compressive Loading/Unloading Cycles in Dense Sand

Correction to: Geotech Geol Eng https://doi.org/10.1007/s10706-020-01385-4

In the original publication of the article, the coefficient of determination (R2) was mistakenly written as “0.99” in Figure 6a. The actual value of coefficient of determination (R2) is “0.81”.

The corrected Fig. 6a is provided below.

Fig. 6
figure6

Load distribution under the helix with increasing helix diameter a comparison of load on central shaft under helix with straight pile tip load

Author information

Affiliations

Authors

Corresponding author

Correspondence to Adnan Anwar Malik.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Malik, A.A., Kuwano, J. Correction to: Single Helix Screw Pile Behavior Under Compressive Loading/Unloading Cycles in Dense Sand. Geotech Geol Eng (2020). https://doi.org/10.1007/s10706-020-01429-9

Download citation