Correction to: Single Helix Screw Pile Behavior Under Compressive Loading/Unloading Cycles in Dense Sand

1 Correction to: Geotech Geol Eng https://doi.org/10.1007/s10706-020-01385-4

In the original publication of the article, the coefficient of determination (R²) was mistakenly written as “0.99” in Figure 6a. The actual value of coefficient of determination (R²) is “0.81”.

The corrected Fig. 6a is provided below.

Fig. 6

Load distribution under the helix with increasing helix diameter a comparison of load on central shaft under helix with straight pile tip load