Advertisement

Fibre Chemistry

, Volume 48, Issue 4, pp 322–328 | Cite as

Manufacture of Parachute Fabric with Specified Air Permeability from Aramid Yarns on Shuttleless Looms

  • P. E. Safonov
  • N. M. Levakova
  • S. S. Yukhin
  • M. E. Bulanova
Article
  • 56 Downloads

We have determined the optimal technological parameters for manufacture of parachute aramid fabric on looms of different designs. We have studied the effect of the basic operating parameters of the loom on the physical and mechanical properties of the fabric. We have established that the air permeability of parachute fabric can be considerably reduced due to buckling of the warp yarns when using droppers. We have worked up recommendations for manufacture of fabric with specified air permeability on a high-speed Dornier rapier loom, making it possible to improve the quality of the fabric and the productivity.

Keywords

Weft Yarn Breaking Load Warp Yarn Tension Level Yarn Tension 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    S. Kawabata, M. Niwa, and H. Kawai, J .Text. Inst., 64, No. 1, 21-46 (1973).Google Scholar
  2. 2.
    V. P. Shcherbakov, N. V. Zavaruev, and O. A. Goncharova, Izv. Vuzov. Tekhnol. Tekst. Prom-sti, No. 1 (349), 156-161 (2014).Google Scholar
  3. 3.
    Zaneta Rukuiziene and Rimvydas Milasius, Fibres & Textiles in Eastern Europe, 14, No. 4 (58), 44-47 (2006).Google Scholar
  4. 4.
    S. E. Beskhlebnaya, “Development of a method for calculating the volume of through-pores in fabrics with basic and derived weaves,” Dissertation in competition for the academic degree of Candidate of Technical Sciences, A. N. Kosygin Moscow State Textile University, Moscow (2004). 168 pp.Google Scholar
  5. 5.
    M. Havlova, Fibres & Textiles in Eastern Europe, 21, No. 2 (98), 84-89 (2013).Google Scholar
  6. 6.
    A. A. Kuznetsov, N. L. Nadezhnaya, and A. V. Charkovskii, Dizain i Tekhnologii, No. 36 (78), 62-67 (2013).Google Scholar
  7. 7.
    E. A. Yukhina, “Determination of the optimal structural parameters and manufacturing conditions for cotton/Lavsan fabrics,” Dissertation in competition for the academic degree of Candidate of Technical Sciences, A. N. Kosygin Moscow Textile Institute, Moscow (1984). 171 pp.Google Scholar
  8. 8.
    A. G. Sevost’yanov, Methods and Tools for Studying Mechanical and Technological Processes in the Textile Industry. A College Textbook [in Russian], A. N. Kosygin Moscow State Textile University, Moscow (2007). 648 pp.Google Scholar

Copyright information

© Springer Science+Business Media New York 2017

Authors and Affiliations

  • P. E. Safonov
    • 1
  • N. M. Levakova
    • 1
  • S. S. Yukhin
    • 2
  • M. E. Bulanova
    • 3
  1. 1.Teks Centre OOO, 2/2 ul. Malaya PochtovayaMoscowRussia
  2. 2.Moscow State University of Design and TechnologyMoscowRussia
  3. 3.Korolev Silk Mill “Peredovaya Tekstil’shchitsa”MoscowRussia

Personalised recommendations