Advertisement

Fibre Chemistry

, Volume 48, Issue 2, pp 173–177 | Cite as

Heating System of a Drying Drum Having a Channel System for Heating the Contact Surface with Steam

  • E. V. Shuvalov
  • L. I. Zhmakin
  • N. M. Sharpar
Article
  • 25 Downloads

Graphs of the time dependence of the kinetic parameters for the process of drying are obtained by analyzing experimental data on the drying of linen fabric with a surface density of 240 g/m2. A new design is proposed for the heating system of a drum-type drying machine and includes a channel system to deliver steam to the drying drums. The possibility of grouping the drums into blocks inside a certain steam group is discussed.

Keywords

Steam Heat Flux Heat Pump Heating System Equilibrium Moisture Content 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    I. P. Kornyukhin and L. I. Zhmakin, Heat Transfer in Porous Solids [in Russian], Informelektro, Moscow (2013).Google Scholar
  2. 2.
    N. E. Kovaleva, Dizain i Tekhnologii, No. 45, 32-40 (2015).Google Scholar
  3. 3.
    V. S. Kurov and N. N. Kokushin, Paper- and Cardboard-Making Machines [in Russian], Izd. Poitekh. Un-ta, St. Petersburg (2006).Google Scholar
  4. 4.
    V. V. Krasnikov, Conductive Drying [in Russian], Energiya, Moscow (1973).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • E. V. Shuvalov
    • 1
  • L. I. Zhmakin
    • 1
  • N. M. Sharpar
    • 1
  1. 1.Moscow State University of Design and TechnologyMoscowRussia

Personalised recommendations