Advertisement

Fibre Chemistry

, Volume 47, Issue 6, pp 489–496 | Cite as

Assessment of the Influence of the Structure of a Composite Nonwoven Material on its Performance Characteristics

  • A. V. Kuznetsov
  • A. V. Genis
  • R. K. Idiatulov
  • Yu. P. Nekrasov
FIBER COMPOSITE MATERIALS

We have studied the influence of the structural parameters of a composite nonwoven material (obtained by introducing a sorption-active filler with different particle size distributions into the interior and o the surface of a polyacrylonitrile fiber during aerodynamic spinning from a polymer solution) on its basic performance characteristics. We have established that obtaining filled nonwoven materials from thin fibers will allow us to appreciably improve the sorption and physicomechanical properties of fiber webs. We show that it is possible to control the structure of a composite nonwoven material by controlling the aerodynamic spinning parameters, allowing us to obtain materials with performance properties that are optimally suited for use in the finished products, including personal protective equipment, medicine, and the pharmaceutical industry

Keywords

Fiber Diameter Fiber Material Physicomechanical Property Nonwoven Material Personal Protective Equipment 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    B. D. Rysyuk and A. V. Genis, Khim. Volokna, No. 4, 47-54 (1992).Google Scholar
  2. 2.
    A. V. Genis, V. V. Usov, and R. K. Idiatulov, “Apparatus for obtaining sorption-filtering nonwoven materials from polymer solutions by aerodynamic spinning,” Russian Federation Patent 62931, 10 May 2007.Google Scholar
  3. 3.
    A. V. Genis and A. V. Smirnov, Plast. Massy, No. 5, 13-17 (2003).Google Scholar
  4. 4.
    D. Tan, C. Zhou et al., J. Non-Newtonian Fluid Mech., 165, 892-900 (2010).CrossRefGoogle Scholar
  5. 5.
    J. Masounave, A. Rollin et al., J. Microscopy, 121, 99-110 (1981).CrossRefGoogle Scholar
  6. 6.
    A. V. Genis, B. V. Baidakov et al., Plast. Massy, No. 5, 20-22 (2013).Google Scholar
  7. 7.
    A. V. Kuznetsov, A. V. Genis et al., Khim. Volokna, No. 1, 34-39 (2015).Google Scholar
  8. 8.
    A. A. Sindeev, A. V. Genis et al., Third International Symposium on Synthetic Fibers [in Russian], Kalinin (1981); Preprints, Vol. 2, pp. 348-354.Google Scholar
  9. 9.
    A. M. Kochnev, A. E. Zaikin, and S. S. Galibeev, Physics and Chemistry of Polymers [in Russian], Fen, Kazan (2003). 512 pp.Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • A. V. Kuznetsov
    • 1
  • A. V. Genis
    • 1
  • R. K. Idiatulov
    • 1
  • Yu. P. Nekrasov
    • 1
  1. 1.Scientific Research Institute of Synthetic Fibers with Experimental PlantTverRussia

Personalised recommendations