Advertisement

Fibre Chemistry

, Volume 42, Issue 1, pp 35–37 | Cite as

Increasing adhesion of a fluoropolymer coating to terlon fabrics

  • A. E. Drogun
Article
  • 44 Downloads

The weave type and density of Terlon fabrics have no effect on the level of their adhesive reaction with a fl uoropolymer coating. Treating Terlon fabric in glow-discharge plasma increases the strength of the bond of the fluoropolymer coating with the fabric by 3-4 times. Use of an adhesive based on urethane rubber and a cross-linking agent — polyisocyanate — increases adhesion of the polymer coating to the Terlon fabric to 1.0 kgf/cm.

Keywords

Bond Strength Polymer Coating Vinylidene Fluoride Cold Resistance Good Adhesive Property 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Fluoropolymers [Russian translation], Mir, Moscow (1975).Google Scholar
  2. 2.
    S. P. Novitskaya, Z. N. Nudel’man, and A. A. Dontsov, Fluoroelastomers [in Russian], Khimiya, Moscow (1988).Google Scholar
  3. 3.
    S. A. Reitlinger, The Permeability of Polymer Materials [in Russian], Khimiya, Moscow (1974).Google Scholar
  4. 4.
    R. P. Oulette, M. M. Barbier, and P. Cheremisinoff, Low Temperature Plasma Technology Applications, Ann Arbor Science, Ann Arbor, Michigan (1980).Google Scholar
  5. 5.
    A. L. Suris, Plasma-Chemical Processes and Equipment [in Russian], Khimiya, Moscow (1989).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2010

Authors and Affiliations

  1. 1.Ivanovo State Chemical Engineering UniversityIvanovo OblastRussia

Personalised recommendations