Abstract
Clean Development Mechanism (CDM) is the market-based mechanism introduced to reduce greenhouse gas emissions (GHGs) during various activities. Enormous literature has been available on the GHG mitigation activities in energy, transport, agriculture, construction, waste handling activities, afforestation and reforestation sectors using CDM. However, no single study has been carried out for reduction of fugitive emissions or leakages which releases during the industrial activities. Therefore, this paper presents a critical assessment of CDM projects implemented to reduce fugitive emissions during industrial activities. Out of entire 7749 registered CDM projects (in all sectors of CDM), only 154 (1.98%) fugitive emission reduction projects were implemented up to 2016. These 154 projects contribute up to 147,563,247 MTCO2e (8.87%) estimated emission reduction out of total 1,663,533,108 MTCO2e estimated emission reduction in all sectors of CDM (https://cdm.unfccc.int/about/index.html). Out of these 154 registered fugitive projects, 125 projects were assessed for fuel emissions, 19 for halocarbons (HCF) emissions and 10 for sulphur hexafluoride (SF6) emissions. The details of the projects were gathered from Project Design Document (PDDs) of United Nations Framework Convention on Climate Change (UNFCCC) project cycle search and further verified by monitoring the reports of each project. These projects were studied to examine estimated emission reductions with special emphasis on the achieved emission reductions in terms of Certified Emissions Reduction (CERs) to calculate financial benefits. Available CDM methodologies to reduce fugitive emissions were also studied. Further, the distribution of these projects across India was mapped using Arc-GIS. Findings show India is second most country after China in registration of CDM projects. Westerns and northern part of India covers maximum CDM activities. Amongst various methodologies, abatement of methane from coalmines (ACM0008), approved methods decomposition of fluoroform (HFC-23) and point of use abatement device to reduce SF6 emissions (AM0078) were used extensively for reduction of fuel, HFC and fluoride gas emissions. 260,064,195 MTCO2e of CERs (14.5%), i.e. emission reduction was achieved from these projects till 2016 (https://cdm.unfccc.int/about/index.html). Therefore, some key challenges or barriers are discussed for development and disclosure of carbon strategies to get transparency in entire CER trading processes.
Similar content being viewed by others
Abbreviations
- CDM:
-
Clean development mechanism
- MTCO2e:
-
Metric tons of carbon dioxide equivalent
- HC:
-
Halocarbons
- SF6 :
-
Sulphur hexafluoride
- HFC:
-
Hydro-flouro-carbon
- ACM:
-
Approved consolidated methodology
- AM:
-
Approved methodology
- AMS:
-
Approved small-scale methodology
- UNFCCC:
-
United Nation Framework Convention on Climate Change
- CER:
-
Certified Emissions Reductions
- GHG:
-
Greenhouse gas
- PDD:
-
Project design document
References
Blomen, E., & Gardiner, A. (2009). Ecofys. http://www.ecofys.com/files/files/serpec_fugitiveemissions_report.pdf. Accessed on April 1, 2015.
Carbon Place. (2017). Carbon value. http://www.carbonplace.eu/info-commodities-CER.
Carras, J. N., Franklin, P. M., Hu, Y., Singh, A. K., Tailakao, O. V., Picard, D., Azhari, F. M., Gjerald, E., Nordrum, S., & Yesserkepova, I. (2006). Fugitive emissions. Guidelines for National Greenhouse Gas Inventories. Intergovernmental Panel on Climate Change (IPCC).
CDM Methodology Booklet. (2014). Clean Development Mechanism, CDM methodology booklet, sixth edition Information updated as of EB 79 November 2014. Available at https://cdm.unfccc.int/methodologies/documentation/1411/CDM-Methodology-Booklet_fullversion_PART_1.pdf.
CDM Methodology Booklet. (2016). Clean Development Mechanism, CDM methodology booklet, Eighth edition Information updated as of EB 91 November 2016. Available at https://cdm.unfccc.int/methodologies/documentation/meth_booklet.pdf.
Central Pollution Control Board (CPCB). (2002). Environmental standards including schedule for their enforcement. Environmental Information System. Annual Report 2001-02. Chapter X. https://www.sdpi.org/publications/report_files/2001-02.pdf.
Central Pollution Control Board (CPCB). (2013). Environmental guidelines for prevention and control of fugitive emissions from cement plants. http://www.cpcb.nic.in/upload/NewItems/NewItem_96_22.pdf. Accessed on February 1, 2013. http://www.cpcb.nic.in/upload/AnnualReports/AnnualReport_6_annualreport2001-02.pdf. Accessed on February 4, 2013.
Department of Climate Change and Energy Efficiency Australia. (2010). http://www.environment.gov.au/climate-change.
Earthworks. (2015a). Sources of oil and gas air pollution, protect the environment. https://www.earthworksaction.org/issues/detail/sources_of_oil_and_gas_air_pollution.
Earthworks. (2015b). Air Contaminants, Protect the Environment. http://www.earthworksaction.org/issues/detail/air_contaminants#.VRtu1_yUeNo. Accessed on January 17, 2014.
Ellis, J., Winkler, H., Corfee-Morlot, J., & Gagnon-Lebrun, F. (2007). CDM: Taking stock and looking forward. Energy Policy, 35(1), 15–28.
Environmental Protection Agency. (1999). http://www.epa.gov/region07/air/nsr/nsrmemos/fug-def.pdf. Accessed on January 28, 2013.
Environmental Protection Agency. (2015). http://epa.gov/climatechange/ghgemissions/gases/fgases.html. Accessed on January 17, 2014.
ESA. (2009). ESA Notifications, Ministry of Environment and Forest, Government of India. Available at http://www.moef.nic.in/content/esa-notifications.
European Sealing Association and Fluid Sealing Association. (1998). Guidelines for safe seal usage–flanges and gaskets. http://europeansealing.com/uploads/resources/publications/ESA-FSA-Guidelines-Flange-Gaskets-009_98_ENG.pdf. Accessed on January 24, 2013.
Grudnoff, M. (2012). Measuring Fugitive emissions: Is coal seam gas a viable bridging fuel? The Australia Institute, Policy Brief No. 41–revised (2012), ISSN 1836-9014.
Hassim, M. H., Péreza, A. L., & Hurme, M. (2010). Estimation of chemical concentration due to fugitive emissions during chemical process design. Process Safety and Environmental Protection, 88(3), 173–184.
Hinostroza, M., Cheng, C. C., Zhu, X., Fenhann, J., Figueres, C., & Avendano, F. (2007). Potential and barriers for end-use energy efficiency under programmatic CDM. United Nation Environment programme, CD4CDM Working Paper Series, working paper 3. http://www.climatechange.gov.au/sites/climatechange/files/documents/03_2013/nggi-quarterly-2010-dec.pdf. Accessed on February 3, 2013.
Humbad, A. (2009). Carbon credits for energy self-sufficiency in rural India-a case study. Energy Education Science and Technology Part A: Energy Science and Research, 22(2), 187–197.
Jalil, A. S., Hashim, H., Hassim, M. H., Anwar, J., & Sapiaa, N. A. H. (2012). Fugitive emission reduction using mixed integer linear programming. Energy Procedia, 14, 1870–1876. https://doi.org/10.1016/j.egypro.2011.12.1181.
Johnson, M. R., Brereton, C. A., Joynes, I. M., & Schoonbaert, S. B. (2011). Development of a novel approach for detecting and locating sources of fugitive emissions. Natural Resources Canada. http://www.ptac.org/projects/106. Accessed on March 18, 2015).
Mayuri, N., Bhagyashree, S., Anju, S., Seema, U., Neelima, N., & Indrayani, N. (2014). Role of Clean Development Mechanism and cleaner technologies in achieving energy efficiency in chemical and manufacturing sectors in India. Journal of Environmental Research and Development, 9(2), 481–493.
Ministry of Environment and Forests (MoEF). (2010). India. India: Greenhouse Gas Emissions 2007. http://moef.nic.in/downloads/public-information/Report_INCCA.pdf. Accessed on February 6, 2013.
Naik, M., Singh, A., Unnikrishnan, S., & Naik, N. (2014). Role of the Clean Development Mechanism (CDM) in the development of National Energy Industries. Energy & Environment, 25(2), 325–342.
Naik, N., Unnikrishnan, S., Singh, A., & Nimkar, I. (2016). Role of Emission Trading and Clean Development Mechanism in achieving cleaner production. International Journal of Environmental Science and Development, 7(11), 843–848.
National Clean Development Mechanism (NCDMA). (2013a). Host Country approval status. Ministry of Environment and Forest, Government of India. Available at http://ncdmaindia.gov.in/.
National Clean Development Mechanism (NCDMA). (2013b). Reports status. Ministry of Environment and Forest, Government of India. Available at http://ncdmaindia.gov.in/ReportsPublic.aspx.
Nussbaumer, P. (2008). On the contribution of labelled certified emission reductions to sustainable development: A multicriteria evolution of CDM projects. Energy Policy, 37(1), 91–101.
Paris climate conference. (2015). Paris Climate Change Conference—November 2015. Available at http://unfccc.int/meetings/paris_nov_2015/meeting/8926.php.
Picard, D. (2007). Fugitive emissions from oil and natural gas activities. Good Practice Guidance and Uncertainty Management in National Greenhouse Gas Inventories. Energy Sector, pp. 103–127.
Rio Summit. (1992). UN conference on environment and development. Available at http://www.un.org/geninfo/bp/enviro.html.
Sandbag. (2011). What is the CDM?, The guardian. https://www.theguardian.com/environment/2011/jul/26/clean-development-mechanism.
Shishlov, I., & Bellassen, V. (2012). 10 Lessons from 10 years of the CDM, Climate Report, CDC Climate, 1–39. http://www.cdcclimat.com/IMG//pdf/12-10-05_climate_report_37_-_10_lessons_from_10_years_of_cdm.pdf.
Silayan, A. (2005). Equitable distribution of CDM projects among developing countries. HWWA-Report. Hamburg, Germany: Hamburg Institute of International Economics, pp. 163–169.
Smith, G. (2007). Understanding and control of fugitive emissions. http://www.ldarenvolve.com/downloads/control_emissions.pdf.
Szweda, R. (2000). Fugitive emissions: The matter of imperfect seals. Sealing Technology, 3, 9–11. https://doi.org/10.1016/S1350-4789(00)80052-5.
UNEP-DTU. (2015). UNEP-DTU partnership. Available at http://www.unepdtu.org/What-We-Do/Thematic-Programmes/Low-Carbon-Development/Projects.
UNFCCC. (2001). Report to the conference of the parties on its seventh session. Part Two: Action taken by the conference of the parties. United Nations Frame-work Convention on Climate Change. FCCC/CP/2001/13/Add2, Marrakesh.
UNFCCC. (2012). UNFCCC, Doha Climate Change Conference—November 2012, Decisions adopted by COP 18 and CMP 8.
UNFCCC. (2014a). Joint Implementation (JI), Kyoto Protocol Mechanisms. http://unfccc.int/kyoto_protocol/mechanisms/joint_implementation/items/1674.php.
UNFCCC. (2014b). Clean Development Mechanism (CDM), Kyoto Protocol Mechanisms. http://unfccc.int/kyoto_protocol/mechanisms/clean_development_mechanism/items/2718.php.
UNFCCC. (2014c). International Emission Trading (ITS), Kyoto Protocol Mechanisms. http://unfccc.int/kyoto_protocol/mechanisms/emissions_trading/items/2731.php.
UNFCCC. (2015a). The mechanisms under the Kyoto Protocol: Emissions Trading, the Clean Development Mechanism and Joint Implementation. http://unfccc.int/kyoto_protocol/mechanisms/items/1673.php.
UNFCCC. (2015b). Clean Development Mechanism (CDM), Kyoto Protocol Mechanisms. Available at https://cdm.unfccc.int/about/index.html.
UNFCCC. (2016). About CDM. https://cdm.unfccc.int/about/index.html.
UNFCCC. (2017). Project cycle search. http://cdm.unfccc.int/Projects/projsearch.html.
United Nation Framework Convention on Climate Change (UNFCCC). (2010). http://unfccc.int/ghg_data/ghg_data_unfccc/items/4146.php. Accessed on January 11, 2013.
United Nations Environmental Protection Agency. (2013). http://epa.gov/climatechange/ghgemissions/global.html. EPA Accessed on March 30, 2015.
United Nations. (1998). Kyoto Protocol to the United Nations Framework Convention on Climate Change. http://unfccc.int/resource/docs/convkp/kpeng.pdf.
United States Environmental Protection Agency (USEPA). (2012). https://www.epa.gov/history.
United States Environmental Protection Agency (USEPA). (2014). https://www.epa.gov/ghgemissions/us-greenhouse-gas-inventory-report-1990-2014.
Wesselink, B., & Deng, Y. (2009). Ecofys. http://www.ecofys.com/files/files/serpec_executive_summary.pdf. Accessed on February 6, 2013.
Acknowledgements
The work presented in the paper has been supported by the project Centre for Environmental Studies (CES), National Institute of Industrial Engineering, Mumbai.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Singh, A., Unnikrishnan, S., Naik, M. et al. CDM implementation towards reduction of fugitive greenhouse gas emissions. Environ Dev Sustain 21, 569–586 (2019). https://doi.org/10.1007/s10668-017-0058-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10668-017-0058-y