Advertisement

Chemical and Petroleum Engineering

, Volume 53, Issue 11–12, pp 759–764 | Cite as

Porous Plastic Packing for Heat and Mass Transfer Processes

  • A. B. Golovanchikov
  • A. A. Shagarova
  • P. S. Vasil’ev
  • K. V. Cherikova
RESEARCH, DESIGN, CALCULATIONS, AND OPERATING EXPERIENCE PROCESSES AND EQUIPMENT FOR CHEMICAL AND OIL-GAS PRODUCTION

The results of hydraulic tests of porous plastic packing for accomplishing heat and mass transfer processes are reported. The tests were carried out in a column with a rectangular cross-section of 125 × 125 mm using 10 × 10 × 2 mm porous plastic Raschig rings. The test results were used to derive graphical and analytical relationships that allow assessment of the hydraulic resistance of the sprayed porous plastic packing for different spray densities under different hydrodynamic column operation conditions. A comparative analysis of the reduced resistance coefficient was made for different types of dry packings from modified Reynolds similarity number.

Keywords

porous plastic packing hydraulic resistance hydrodynamic conditions resistance coefficient Reynolds similarity number 

References

  1. 1.
    D. A. Baranov (ed.), Packings of Mass Transfer Columns, Infokhim, Moscow (2009).Google Scholar
  2. 2.
    A. M. Kagan, A. S. Pushnov, and A. S. Ryabushenko, “Packed contact devices,” Khim. Tekhnol., 8, No. 5, 232–140 (2007).Google Scholar
  3. 3.
    V. A. Pronin, A. P. Verboloz, and A. V. Utin, Useful Model No. 125877 RF, IPC B 01 D 47/14, B 01 J 19/30, “Packed scrubber,” Byull., No. 8 (2013).Google Scholar
  4. 4.
    A. B. Golovanchikov, P. S. Vasil’ev, S. L. Reva, et al., Useful Model No. 135522 RF, IPC B 01 D 3/00, “Mass transfer plate,” Byull., No. 35 (2013).Google Scholar
  5. 5.
    A. K. Mitin, N. E. Nikolaikina, A. S. Pushnov, and N. A. Zagustina, Patent No. 2548439 RF, IPC B 01 D 53/74, “Regular packing for heat and mass transfer apparatuses, preeminently bioreaction,” Byull., No. 11 (2015).Google Scholar
  6. 6.
    V. L. Ryzhkov, V. L. Klochkov, and V. I. Voskresenskii, Production of Porous Industrial Rubber Goods, TsNIITENeftekhim, Moscow (1979).Google Scholar
  7. 7.
    V. L. Ryzhkov and V. L. Klochkov, Performance Properties of Porous Elastomer Products, TsNIITENeftekhim, Moscow (1979).Google Scholar
  8. 8.
    N. A. Merentsov, V. A. Balashov, and Ya. A. Orlyankina, “Criterial equations for calculating hydraulic resistance of dry packing,” Izv. VolgGTU, Iss. 6, No. 1, 112–114 (2013).Google Scholar
  9. 9.
    N. A. Merentsov, V. A. Balashov, N. A. Dul’kina, and Ya. A. Orlyankina, “Procedure for evaluating hydrodynamic conditions of operation of tube catalytic reactor,” Izv. VolgGTU, Iss. 7, No. 1, 101–103 (2014).Google Scholar

Copyright information

© Springer Science+Business Media, LLC, part of Springer Nature 2018

Authors and Affiliations

  • A. B. Golovanchikov
    • 1
  • A. A. Shagarova
    • 1
  • P. S. Vasil’ev
    • 1
  • K. V. Cherikova
    • 1
  1. 1.Volgograd State Technical UniversityVolgogradRussia

Personalised recommendations