Chemical and Petroleum Engineering

, Volume 52, Issue 7–8, pp 441–451 | Cite as

Investigation and a Technique for Calculating the Mode of Deformation of the Bayonet Catch of the Steam Chamber of a Bpm-100 Automatic Line

RESEARCH, DESIGN, CALCULATIONS, AND OPERATING EXPERIENCE Processes and Equipment for Chemical and Oil-Gas Production

A computational procedure and technique for computing the strength and tension of a bayonet catch (represented as a thin short cylindrical shell, with a ring on one edge of the shell and teeth along the other edge) loaded on the side of the teeth with a regular load are proposed. It is shown that with this type of loading, the stresses and displacements differ significantly from the computed values obtained in axisymmetric loading.


cylindrical shell bayonet catch loading deformation 


  1. 1.
    A. N. Dukhovnyi, I. I. Tarasov, and I. K. Sbrodov, “On the study of the stress state of a bayonet catch,” Tr. VNIIRTmash, Tambov (1977), Iss. 4.Google Scholar
  2. 2.
    S. V. Boyarshinov, Foundations of Structural Mechanics of Engines, Mashinostroenie, Moscow (1977).Google Scholar
  3. 3.
    I. A. Birger and Ya. G. Panovko (eds.,), Strength, Stability, Vibrations: Ref. Book, Mashinostroenie, Moscow (1988), Vol. 1.Google Scholar
  4. 4.
    I. A. Berger, B. F. Shorr, and G. B. Iosilevich, Strength Calculations of Machine Parts: Ref. Book, Mashinostroenie, Moscow (1979).Google Scholar
  5. 5.
    V. I. Feodos’ev, Resistance of Materials, Izd. MGTU im. Baumana, Moscow (1999).Google Scholar
  6. 6.
    V. I. Myachenkov et al., Calculation of Machine Building Structures by the Method of Finite Elements: Ref. Book, Mashinostroenie, Moscow (1989).Google Scholar

Copyright information

© Springer Science+Business Media New York 2016

Authors and Affiliations

  • V. I. Kochetov
    • 1
  • S. I. Lazarev
    • 2
  • G. S. Baronin
    • 2
  1. 1.Research Institute of Rubber Machinery (NIIRTMash)TambovRussia
  2. 2.Tambov State Technical UniversityTambovRussia

Personalised recommendations