Chemical and Petroleum Engineering

, Volume 50, Issue 9–10, pp 610–613 | Cite as

Effect of Structural Characteristics on Abrasive Wear Resistance and Impact Strength of Facing and Carbonitrided Coatings

  • V. I. Kolmykov
  • D. N. Romanenko
  • K. I. Abyshev
  • V. V. Nasteka

High abrasive wear resistance and impact strength of materials is provided (if they have heterophase structures impregnated with hard particles) by particles isolated from each other by relatively ductile matrix. Materials with this structure may be prepared by facing or carbonitriding by special regimes.


abrasive wear resistance impact strength structure facing carbonitriding hardening 


  1. 1.
    M. M. Khrushchov and M. A. Babichev, Abrasive Wear, Nauka, Moscow (1970).Google Scholar
  2. 2.
    B. I. Kostetskii, Surface Strength of Materials with Friction, Tekhnika, Kiev (1976).Google Scholar
  3. 3.
    M. M. Khrushchov (ed.), Wear Resistance and Structure of Hard Facings: Handbook, Mashinostroenie, Moscow (1971).Google Scholar
  4. 4.
    B. Przhenosil, Carbonitriding, Mashinostroenie, Moscow (1969).Google Scholar
  5. 5.
    V. I. Kolmykov, N. D. Tutov, A. A. Nikulin, et al., “Development and study of highly active impregnated media for steel carbonitriding at low and high temperature,” in: Materials and Hardening Technology, KGTU, Kursk (2008), pp. 145–147.Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • V. I. Kolmykov
    • 1
  • D. N. Romanenko
    • 1
  • K. I. Abyshev
    • 1
  • V. V. Nasteka
    • 2
  1. 1.South-West State UniversityKurskRussia
  2. 2.Gazprom Dobycha Astrakhan CompanyAstrakhanRussia

Personalised recommendations