Chemical and Petroleum Engineering

, Volume 49, Issue 11–12, pp 825–830 | Cite as

Experimental Investigation of the Influence of Wear Particles on the Process of Lapping of the Sealing Surfaces of Valves

  • A. Yu. Ardeev
  • A. V. Kuz’min
  • V. V. Smogunov
Fabrication Technology

The mechanism of formation of wear particles and the influence of the particles on the process of lapping of the wedges of gate valves are investigated. A series of experiments is performed in order to determine qualitative and quantitative estimates of wear particles that are formed during lapping of the parts of valves. The influence of the wear particles thus formed on the roughness of the surface of machined parts (Ra parameter) is determined.


lapping wear particles roughness experiment design 


  1. 1.
    B. Ya. Tambulatov, Lapping Machines [in Russian], Mashinostroenie, Moscow (1980).Google Scholar
  2. 2.
    I. G. Goryacheva, Mechanics of Friction Interaction [in Russian], Nauka, Moscow (2001).Google Scholar
  3. 3.
    I. G. Zedginidze, Experiment Design for Studying Multicomponent Systems [in Russian], Nauka, Moscow (1976).Google Scholar
  4. 4.
    O. A. Vdovikina, A. V. Kuz’min, and M. A. Isupov, “Display of the roots of the characteristic equation of flexural vibrations, ioon,” in: Reliability and Quality2010: Proc Int. Symp., Izd. Penza State University, Penza (2010), Vol. 1, pp. 249–250.Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • A. Yu. Ardeev
    • 1
  • A. V. Kuz’min
    • 1
  • V. V. Smogunov
    • 1
  1. 1.Penza State UniversityPenzaRussia

Personalised recommendations