Advertisement

Chemical and Petroleum Engineering

, Volume 49, Issue 9–10, pp 635–638 | Cite as

Expanding the Cylindrical ends of Shaped Tubes

  • S. V. Parshin
Manufacturing Technology
  • 39 Downloads

A method of flaring the cylindrical end sections of shaped tubes with rolling devices is described. These tubes are used in the production of heat exchangers, and also in the oil-gas industry (shaped well covers). A model of the process, which makes it possible to determine the stress-strain state and damage sustained by the tube material is proposed, and the sequence of calculations is indicated. Recommendations for refinement of the flaring process are given on the basis of the results obtained.

Keywords

Flare Tube Material Strain Step Axial Feed Support Cone 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    S. V. Parshin, “Status and prospects for development of profiled-tube production,” Proizv. Prokata, No. 2, 32–35 (2008).Google Scholar
  2. 2.
    A. I. Remnev, Resource-Conserving Procedures for Fabrication and Assembly of Components of Heat-Exchange Systems: Auth. Abstr. Dissert. Cand. Techn. Sci., TGU, Tula (2007).Google Scholar
  3. 3.
    I. L. Perlin and M. Z. Ermanok, Drawing Theory [in Russian], 2nd edition, Metallurgiya, Moscow (1971).Google Scholar
  4. 4.
    G. S. Abdrakhmanov, Stabilization of Wells with Expandable Pipes [in Russian], Izd. Dom ROSING, Samara (2003).Google Scholar
  5. 5.
    I. Ya. Tarnovskii, A. A. Pozdeev, O. A. Ganago, et al., Theory of Pressure Treatment of Metals: Variational Methods of Calculating Forces and Deformations [in Russian], Metallurgizdat, Moscow (1963).Google Scholar
  6. 6.
    A. A. Bogatov, O. I. Mizhirmtskii, and S. V. Smirnov, Plasticity Reserve of Metals Subject to Pressure Treatment [in Russian], Metallurgiya, Moscow (1984).Google Scholar
  7. 7.
    S. V. Parshin, Russian Federation Patent No. 2337781S1, “Device for flaring of tubes,” subm. Nov. 10, 2008 Byull., No. 31.Google Scholar
  8. 8.
    S. V. Parshin, Russian Federation Patent No. 2450879S1, “Device for flaring of tubes,” subm. May 20, 2012 Byull., No. 14.Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  1. 1.Yeltsin Ural Federal University (UrFU)YekaterinburgRussia

Personalised recommendations