Advertisement

Chemical and Petroleum Engineering

, Volume 49, Issue 9–10, pp 584–587 | Cite as

Influence of Ultrasound and Heat Treatment on the Rheological Properties of Ust-Tegusskoe Oil

  • M. S. Mullakaev
  • D. F. Asylbaev
  • V. G. Prachkin
  • G. I. Volkova
Article

The effect of ultrasound and heat treatment on the dynamic viscosity, pour point, density, acidity, interphase tension at the water interface, and chemical composition of Ust-Tegusskoe oil is investigated. It was revealed that the plastic viscosity of the treated oil was diminished by a factor of 1.7 and the pour point by 32°C after ultrasonic treatment. Maximum depression of the pour point is obtained after ultrasonic treatment at 80°C and pressure of 1 atm in a helium medium.

Keywords

Shear Rate Dynamic Viscosity Pour Point Plastic Viscosity Asphaltene Deposit 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    A. A. Boksernan (ed.), V. K. Gomzikov, A. Ya. Fursov, et al., Concept of Government Control of Rational Utilization of Oil Reserves [in Russian], Zarubezhneft, Moscow (2005).Google Scholar
  2. 2.
    S. N. Zakirov, Concept of Program for Overcoming the Downfall of Oil Recovery [in Russian], RGU Nefti i Gaza, Moscow (2006).Google Scholar
  3. 3.
    Yu. I. Gorbachev, N. I. Ivanova, T. V. Kolesnikov, et al., “Acoustic methods of increasing oil recovery and intensifying oil extraction,” Neft. Khoz., No. 5, 18–20 (2002).Google Scholar
  4. 4.
    V. S. Nikitin, G. N. Yagodov, T. L. Nenartovich, et al., “Procedure for increasing oil extraction by super-power ultrasonic action,” Neftepromysl. Delo: NTZh/VNIIOENG, No. 8, 14–17 (2010).Google Scholar
  5. 5.
    M. A. Promtov and A. S. Avseev, “Pulsed methods for refinement of oil and oil products,” Nefteper. Neftekhim., No. 6, 22–24 (2007).Google Scholar
  6. 6.
    A. A. Pliss, V. P. Zolotov, and A. V. Yakimov, “Effect of ultrasound on the physicochemical properties of oil,” Interval, No. 3, 36–39 (2007).Google Scholar
  7. 7.
    M. S. Mullakaev, V. O. Abramov, G. I. Volkova, et al., “Effect of ultrasonic action and chemical reagents on the rheologic properties of heavy crudes,” Oborud. Tekhnol. Neftegaz. Kompleksa, No. 5, 31–34 (2010).Google Scholar
  8. 8.
    M. S. Mullakaev, V. O. Abramov, O. M. Gradov, et al., “Effect of ultrasonic treatment and chemical reagents on the rheologic properties of Luzanovskoe oil,” Nefteper. Neftekhim., No. 12, 17–22 (2011).Google Scholar
  9. 9.
    N. N. Abryutina and V. V. Abushaeva, Modern Methods for Investigation of Crudes: Reference-Methodical Manual [in Russian], A. I. Bogomolov et al. (eds.), Nedra, Leningrad (1984).Google Scholar
  10. 10.
    B. M. Rybak, Analysis of Crude Oil and Petroleum Products [in Russian], Izd. Neft. Gorno-Topl. Literatury, Moscow (1962).Google Scholar
  11. 11.
    Russian Federation Certificate No. C.32.004.A, “INPN SX-800 measuring device for low-temperature indicators of petroleum products,” State Register of Measurement Instruments No. 31853 of 07.02.2008.Google Scholar
  12. 12.
    G. A. Babalyan, I. I. Kravchenko, I. L. Markhasin, and G. V. Rudakov, Physicochemical Application of Surface-Active Substances for Working of Oil Seams [in Russian], GNT Izd. Neft. Gorno-Topl. Literatury, Moscow (1962).Google Scholar
  13. 13.
    G. I. Fuks, Viscosity and Plasticity of Petroleum Products [in Russian], Institute of Computer Research, Moscow–Izhevsk (2003).Google Scholar

Copyright information

© Springer Science+Business Media New York 2014

Authors and Affiliations

  • M. S. Mullakaev
    • 1
  • D. F. Asylbaev
    • 1
  • V. G. Prachkin
    • 2
  • G. I. Volkova
    • 3
  1. 1.Kurnakov Institute of General and Inorganic Chemistry, Russian Academy of Sciences (IONKh RAN)MoscowRussia
  2. 2.Ufa State Petroleum Technical UniversityUfaRussia
  3. 3.Institute of Petrochemistry, Siberian Branch of the Russian Academy of SciencesTomskRussia

Personalised recommendations