Results are provided for work on molding mixed products with a polymer binder granular structure, prepared by cryomechanical technology. The possibility is considered of accomplishing the process of homogenizing powder filler by compression impregnation. A mathematical expression is obtained making it possible to calculate the time required for mixed product formation in relation to initial binder granule size and other moldable mix parameters. The efficiency of homogenization in different molding methods for mixed products with a polymer binder granular structure is evaluated. The expediency of compression impregnation in molding objects by plunger extrusion is demonstrated.
Similar content being viewed by others
References
N. G. Ermoshin, O. V. Tin’kov, N. M. Varenykh, and V. I. Sarab’ev, “Cryogenic treatment of polymer binders in the manufacture of mixed powder products,” Khim. Neftegaz. Mashinostr., No. 1, 18–22 (2009).
M. B. Generalov, Mechanics of Solid Dispersed Media in Chemical Technology Processes: High School Textbook [in Russian], Izd. N. Bochkarevoi, Kaluga (2002).
A. P. Telkov and S. I. Grachev, Seam Hydrodynamics Applied to Oil and Gas Deposit Development: Textbook [in Russian] TyumGNGU, Tyumen (2009), Part 1.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimicheskoe I Neftegazovoe Mashinostroenie, No. 7, pp. 3–7, July, 2013.
Rights and permissions
About this article
Cite this article
Urseev, P.A., Tin’kov, O.V. & Ermoshin, N.G. Formation of Mixed Products based on Binder Components Processed by Cryomechanical Technology. Chem Petrol Eng 49, 421–428 (2013). https://doi.org/10.1007/s10556-013-9767-8
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-013-9767-8