Chemical and Petroleum Engineering

, Volume 49, Issue 3–4, pp 270–275 | Cite as

Requirements for evaluation of the technical condition of tube-furnace doubles

  • V. K. Pogodin
  • E. A. Perminova
  • E. A. Mikhailyuk
  • A. N. Aktuganov

Requirements are outlined for evaluation of the doubles of coil furnaces during fabrication, repair, and service at petrochemical and oil-refining plants. Observance of these requirements makes it possible to determine defects in the doubles and their magnitude, and assess the possibility of eliminating the latter, and also the possibility of returning the doubles to service after elimination of defects.


requirements assessment of technical condition doubles furnace coils 


  1. 1.
    STO SA 03-004–2009, Tube Furnaces, Tanks, Vessels, and Equipment for Oil-Refining and Petrochemical Industries. Requirements for Technical Inspection, Revision, and Rejection, VGPU Peremena, Volgograd (2010).Google Scholar
  2. 2.
    Administrative Regulation of the Federal Service for Environmental, Technological, and Nuclear Supervision Relative to Observance of Government Activity Involving Issuance of Resolutions on Use of Specific Kinds (types) of Technical Devices for Safe Production Entities Approved per Order No. 112 of the Federal Service for Ecologic and Nuclear Inspection on 29 February 2008.Google Scholar
  3. 3.
    RD 03-606-03, Instructions for Visual and Instrument Monitoring, Scientific and Technical Center for Industrial Safety, Moscow (2003).Google Scholar
  4. 4.
    OST 26-5–99, Nondestructive Monitoring. Color Method for Monitoring of Welded Joints, Fused and Base Metal.Google Scholar
  5. 5.
    GOST 18442–80, Nondestructive Monitoring. Capillary Methods. General Requirements.Google Scholar
  6. 6.
    GOST 21105–87, Nondestructive Monitoring. Magnetic-Particle Method.Google Scholar
  7. 7.
    STO 00220227-02-2006, Welded Steel Vessels and Pipelines. Procedure for Magnetic Monitoring.Google Scholar
  8. 8.
    GOST 9012–59, Metals. Method for Determination of Brinell Hardness.Google Scholar
  9. 9.
    GOST 9013–59, Metals. Method for Determination of Rockwell Hardness.Google Scholar
  10. 10.
    GOST 23677–79, Hardness Measurements for Metals. General Technical Requirement.Google Scholar
  11. 11.
    GOST 868–82, Internal Dial Gages With Scale Division of 0.01 mm. Technical Specifications.Google Scholar
  12. 12.
    GOST 2789–73, Surface Roughness. Parameters and Characteristics.Google Scholar
  13. 13.
    STO 00220227-028–2009, Procedure for Assessment of Technical Condition of Double Parts and Detachable Connections of Furnace Coils.Google Scholar
  14. 14.
    GOST 18126–94, Bolts and Nuts with Thread Diameters Over and Above 48 mm. General Technical Specifications.Google Scholar
  15. 15.
    PB 03-585-03, Rules for Installation and Safe Operation of Production Pipelines, Moscow (2004).Google Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  • V. K. Pogodin
    • 1
  • E. A. Perminova
    • 1
  • E. A. Mikhailyuk
    • 1
  • A. N. Aktuganov
    • 2
  1. 1.Irkutsk Research and Design Institute of Chemical and Petrochemical Engineering (IrkutskNIIkhimmash)IrkutskRussia
  2. 2.Engineering Systems CompanyAngarskRussia

Personalised recommendations