Advertisement

Chemical and Petroleum Engineering

, Volume 48, Issue 9–10, pp 636–641 | Cite as

Study of damage accumulation within the structure of polymer materials under load

  • O. Yu. Erenkov
  • O. V. Fofonova
  • S. N. Khimukhin
  • E. Z. Yagubov
Materials Science and Corrosion Protection
  • 46 Downloads

Results are provided for experimental study of the deformation and failure mechanism for polymer materials with specimen uniaxial tension. An acoustic emission method is used for quantitative evaluation of the test process. Comparative analysis is provided for volumetric structural changes in specimens and corresponding acoustic emission elastic wave parameters for brittle and ductile materials.

Keywords

Acoustic Emission Acoustic Emission Signal Acoustic Emission Sensor Acoustic Emission Parameter Acoustic Emission Pulse 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    A. A. Askadskii, Deformation of Polymers [in Russian], Khimiya, Moscow (1973).Google Scholar
  2. 2.
    S. B. Ratner and V. P. Yartsev, Physical Mechanics of Plastics [in Russian], Moscow (1982).Google Scholar
  3. 3.
    A. P. Braginskii, “Prediction of structural rebuilding in materials with respect to features of collective behavior of an acoustic emission source,” in: Physical Aspects of Failure Prediction and Heterogeneous Material Deformation [in Russian], Leningrad (1987), pp. 55–57.Google Scholar
  4. 4.
    V. P. Tamuzh (ed.), Breakdown of Polymer Material Composites [in Russian], Zinatne, Riga (1986).Google Scholar
  5. 5.
    V. F. Shlenskii, “Correlation of acoustic and optical parameters with structural changes in glass-reinforced plastics with static and multicycle loading,” in: Acoustic Emission of Heterogeneous Materials: Coll. Sci. Works [in Russian] (1986), pp. 106–115.Google Scholar
  6. 6.
    A. M. Leskovskii, G. Kh. Narzulaev, V. I. Mozgunov, et al., “AE during deformation of composite materials with different matrices,” ibid., pp. 155–160.Google Scholar
  7. 7.
    G. Kh. Narzulaev, N. A. Sukhanov, and A. G. Pozamontir, “AE with uniaxial tension of carbon-reinforced plastics with a different reinforcement scheme,” ibid., pp. 146–154.Google Scholar
  8. 8.
    N. A. Semashko and V. I. Shport (eds.), Acoustic Emission in Experimental Materials Science [in Russian], Mashinostroenie, Moscow (2002).Google Scholar
  9. 9.
    G. M. Bartenev, Polymer Strength and Failure Mechanism [in Russian], Khimiya, Moscow (1984).Google Scholar
  10. 10.
    E. M. Kartashov, B. Tsoi, and V. V. Shevelev, Structural and Statistical Kinetics of Polymer Failure [in Russian], Khimiya, Moscow (2002).Google Scholar

Copyright information

© Springer Science+Business Media New York 2013

Authors and Affiliations

  • O. Yu. Erenkov
    • 1
  • O. V. Fofonova
    • 2
  • S. N. Khimukhin
    • 3
  • E. Z. Yagubov
    • 4
  1. 1.Pacific Ocean State UniversityKhabarovskRussia
  2. 2.Far East Research Institute of Shipbuilding TechnologyKhabarovskRussia
  3. 3.Institute of Material Sciences, Khabarovsk Scientific CenterFar East Branch of Russian Academy of SciencesKhabarovskRussia
  4. 4.Branch of Far East Federal UniversityNakhodkaRussia

Personalised recommendations