Model of the inlet section of hydrodynamic flow stabilization in a regular packing

  • A. S. Pushnov
  • N. P. Lozovaya
  • M. G. Lagutkin
Research, Design, Calculations, and Operating Experience Processes and Equipment for Chemical and Oil-Gas Production

A model of the inlet section of hydrodynamic flow stabilization is proposed. The expanse of the zone of extremal flow restructuring is evaluated numerically for the section of hydrodynamic stabilization within the limits of which the height of the bundle of a regular packing should be assigned.


Liquid Film Inlet Section Turbulent Pulsation Regular Packing Packed Tower 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


  1. 1.
    A. A. Makhnin and N. I. Volodin, “Removal of organic solvents from production and ventilation effluents,” Khim. Prom. Segodnya, No. 3, 41–45 (2007).Google Scholar
  2. 2.
    P. S. Poshkas, “Interrelation between aerodynamics and heat-transfer processes in short high-Re flows past tube bundles,” Author’s Abstr. of Dissertation for Candidate of Technical Sciences [in Russian], Institute of Physico-Technical Problems of Power Engineering, Academy of Sciences of the Lithuanian SSR, Kaunas (1978).Google Scholar
  3. 3.
    “A regular packing for absorption and distillation processes,” Sulzer Chemtech Co. Catalogue No. 40-XI.05, issued on October 22, 2006.Google Scholar
  4. 4.
    N. M. Zhavoronkov, Theoretical Bases of Chemical Engineering. Selected Works [Russian translation], Nauka, Moscow (2007).Google Scholar
  5. 5.
  6. 6.
    M. B. Krivosheina, B. L. Sverdlin, and A. G. Kondrat’ev, News of the Vedeneev All-Union Research Institute of Hydraulic Engineering: Coll. Sci. Works [in Russian], Vol. 192, Energoatomizdat, Leningrad (1986), pp. 47–51.Google Scholar
  7. 7.
    A. G. Laptev, Boundary-Layer Models and Analysis of Heat- and Mass-Exchange Processes [in Russian], Izd. Kasan. Univ., Kazan (2007).Google Scholar
  8. 8.
    L. P. Kholpanov, “Methods for analysis of the hydrodynamics and heat- and mass exchange in systems with a stationary interface,” Teor. Osn. Khim. Tekhnol., 27, No. 1, 15–21 (1993).Google Scholar
  9. 9.
    L. Ya. Zhivaikin, “Liquid-films in film-type vessels,” Khim. Mashinostr., No. 7, 25 (1961).Google Scholar
  10. 10.
    V. S. Timofeev, “Experimental investigation of liquid-film thickness,” Izv. Vuzov. Ser. Mashinostr., No. 11, 64–66 (1971).Google Scholar
  11. 11.
    N. N. Kulov, V. P. Vorotlin, and V. A. Malyusov, “Free flow of a turbulent liquid film,” Teor. Osn. Khim. Tekhnol., 7, No. 5, 717–726 (1973).Google Scholar
  12. 12.
    I. A. Arkharov and E. S. Navasardyan, “Simulation of heat and mass exchange in regular packings of towers in distillation units,” Khim. Neftegaz. Mashinostr., No. 9, 22–25 (2006).Google Scholar
  13. 13.
    R. Billet, Packed Towers in Processing and Environmental Technology, VCN, New York (1995).CrossRefGoogle Scholar
  14. 14.
    A. G. Laptev and I. A. Vedgaeva, Installation and Analysis of Industrial Cooling Towers [in Russian], KGEU, Kazan (2004).Google Scholar
  15. 15.
    Film Heat- and Mass-Exchange Equipment [in Russian], edited by V. M. Olevskii, Khimiya, Moscow (1988).Google Scholar
  16. 16.
    A. P. Solodov and E. V. Ezhov, Elementary Heat-Exchange Models for Condensation: Textbook [in Russian], Izd. MEI, Moscow (2006).Google Scholar
  17. 17.
    A. S. Petrov, “Nonuniformity of the zone of influence of local resistance,” News of the Vedeneev All-Union Research Institute of Hydraulic Engineering. Vol. 210, Hydroaerothermal Investigations of Cooling Systems at TPP and NPP [in Russian], Energoatomizdat, Leningrad (1988), pp. 64–69.Google Scholar
  18. 18.
    R. B. Shlyazhas, “Turbulent momentum and heat transfer in the boundary layer past an obstacle,” Author’s Abstr. of Dissertation for Candidate of Technical Sciences, Kaunas (1984).Google Scholar
  19. 19.
    Handbook on Physical-Technical Fundamentals of Cryogenics [in Russian], edited by M. P. Malkov, 2nd edition, Energiya, Moscow (1973), p. 243.Google Scholar
  20. 20.
    G. F. Bystritskii, Power Equipment for Industrial Establishments: Textbook for Students in Higher Educational Institutes [in Russian], 4th edition, ITs Akademiya, Moscow (2008), p. 304.Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2010

Authors and Affiliations

  • A. S. Pushnov
    • 1
  • N. P. Lozovaya
    • 1
  • M. G. Lagutkin
    • 1
  1. 1.Moscow State University of Engineering Ecology (MGUIE)MoscowRussia

Personalised recommendations