Parameters are calculated for a welding regime for gas pipeline annular joints made of high-strength steel Kh80. A structural diagram for the most dangerous area, i.e., the zone near the seam (ZNS) of a welded joint, and the dependence of hardness and impact strength on the structure and phase composition of the ZNS metal, formed during welding with different cooling rates, and also standard specifications for welded annular joints of steel Kh80 pipes are provided. Parameters are calculated for a manual arc welding regime for an annular joint and the recommended regime parameters are indicated for providing the required ZNS metal cooling rate.
Similar content being viewed by others
Reference
STO Gazprom-2006, Instructions for Welding Technology in Constructing and Repairing Oil-Field and Main Gas Pipelines.
Author information
Authors and Affiliations
Additional information
Translated from Khimicheskoe i Neftegazovoe Mashinostroenie, No. 11, pp. 47–48, November, 2008.
Rights and permissions
About this article
Cite this article
Efimenko, L.A., Elagina, O.Y., Vyshemirskii, E.M. et al. Calculation of parameters for welding annular joints of high-strength steel Kh80 gas pipelines. Chem Petrol Eng 44, 676–679 (2008). https://doi.org/10.1007/s10556-009-9125-z
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10556-009-9125-z