Advertisement

Chemical and Petroleum Engineering

, Volume 44, Issue 9–10, pp 499–502 | Cite as

Modeling of loads on cutting elements of drill bits

  • K. A. Polyakov
  • Ya. M. Klebanov
  • V. V. Remnev
  • R. M. Bogomolov
  • A. E. Erisov
Article
  • 132 Downloads

A new approach to modeling of the work performed by cone drill bits at the face is outlined. A virtual model of the dynamic force interaction between a cone drill bit and the face of the hole is proposed. The ADAMS software package is used for the modeling with consideration of frictional forces in the sliding supports, the frictional forces of the equipment components, and the depth of their embedment in the rock. The dynamic forces acting on the teeth during rotation of the cutters, and the distribution of average loads around the rings and cutters of the bit are obtained. The possibility of using the model developed to optimize parameters of bit equipment is demonstrated.

Keywords

Average Load Frictional Force Virtual Model Physicomechanical Characteristic Virtual Assembly 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    A. N. Popov, A. I. Spivak, T. O. Akbulatov, et al., Drilling Technology for Oil and Gas Wells: University Textbook [in Russian], OOO Nedra-Biznestsentr, Moscow (2003).Google Scholar
  2. 2.
    R. A. Badalov and S. A. Makhmudov, “Load distribution on support components of a three-cone drill bit,” Izv. Vuzov. Neft' Gaz, No. 4, 24–28 (1968).Google Scholar
  3. 3.
    S. P. Batalov, V. V. Remnev, and V. N. Gladkikh, “Selection of rational conditions for the testing of drill bits,” Khim. Neft. Mashinostr., No. 1, 16–18 (1994).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2008

Authors and Affiliations

  • K. A. Polyakov
    • 1
  • Ya. M. Klebanov
    • 1
  • V. V. Remnev
    • 2
  • R. M. Bogomolov
    • 2
  • A. E. Erisov
    • 2
  1. 1.Samara State Technical UniversitySamaraRussia
  2. 2.Volgaburmash OAOSamaraRussia

Personalised recommendations