Advertisement

Chemical and Petroleum Engineering

, Volume 43, Issue 11–12, pp 660–666 | Cite as

Increase in the efficiency of preparing specially pure hydrogen from methane in a high-temperature converter-membrane equipment system

  • A. B. Vandyshev
  • V. A. Kulikov
  • S. N. Nikishin
Cryogenic Engineering, Production and Use of Industrial Gases, Refrigeration Engineering
  • 28 Downloads

Abstract

The possibility is analyzed of preparing specially pure hydrogen (SPH) in a high-temperature converter-membrane equipment system drawing on model representations developed previously using heat-resistant palladium alloys. Dependences are calculated for the parameters of membrane separation of methane steam catalytic conversion products on membrane area with different ratios of \(C_{H_2 O} /C_{CH_4 } \) in the starting material. The high efficiency of preparing SPH is demonstrated, i.e., of the order of 1.28 m3 per cubic meter of starting gas.

Keywords

Membrane Area Pure Hydrogen Membrane Extraction Specific Flow Rate Steam Conversion 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    V. A. Goltsov, P. V. Gel’d, N. M. Timofeev, G. E. Kagan, and I. F. Belyaev, “Alloy based on palladium for manufacturing filtering elements used during preparation of high quality hydrogen,” USA Patent 3804616, Publ. in 1974.Google Scholar
  2. 2.
    V. M. Makarov, “Fundamental and applied studies in creating a new generation of devices for preparing specially pure hydrogen by membrane technology,” Probl. Mashinotr. Nadezh. Mashin., No. 5, 56–60 (1990).Google Scholar
  3. 3.
    V. M. Baboshin, Yu. A. Buevich, A. K. Ivonin, et al., “Diffusion separation of hydrogen from gas mixtures,” Inzh.-Fiz. Zh., 47, No. 1, 100–104 (1984).Google Scholar
  4. 4.
    A. B. Vandyshev, V. A. Kulikov, I. V. Kirnos, and S. N. Nikishin, “High-temperature membrane equipment in hydrogen repeated use systems,” Khim. Neftegas. Mashinostr., No. 11, 20–22 (2006).Google Scholar
  5. 5.
    A. B. Vandyshev, L. L. Murav’ev, I. N. Veselov, and N. I. Timofeev, “The analysis of a series of simple technological schemes for ultra-pure hydrogen production,” Proc. 13th World Hydrogen Energy Conf., Beijing, China (2000).Google Scholar
  6. 6.
    A. B. Vandyshev, L. L. Murav’ev, V. M. Makarov, and T. B. Usova, “Effect of chemical reaction in the system C-H-O on membrane extraction of specially pure hydrogen,” Khim. Neftegas. Mashinostr., No. 1, 7–11 (2000).Google Scholar
  7. 7.
    A. B. Vandyshev, L. L. Murav’ev, V. A. Kulikov, and V. A. Kirnos, “Preparation of specially pure hydrogen with a high and low natural gas inlet pressure,” Proc. Internat. Symp. on Hydrogen Power Engineering, Moscow, November 1–2, 2005, Idz. MÉI, Moscow.Google Scholar
  8. 8.
    S. A. Bulanichev, Yu. N. Guk, V. P. Kadnikov, I. V. Kirnos, S. T. Klyshnikov, and B. G. Kukui, “Method for preparing pure hydrogen and a device for accomplishing it,” RF Patent 2085476, Claimed 04.22.1993, Publ. 07.27.1997.Google Scholar
  9. 9.
    L. L. Murav’ev, A. B. Vandyshev, and V. M. Makarov, “Effect of recirculation on membrane extraction of hydrogen from the products of steam conversion of methane,” Khim. Neftegas. Mashinostr., No. 8, 17–20 (2000).Google Scholar
  10. 10.
    L. L. Murav’ev, A. B. Vandyshev, and V. M. Makarov, “Effect of starting gas mixture composition on membrane extraction of specially pure hydrogen,” Khim. Neftegas. Mashinostr., No. 10, 3–7 (2001).Google Scholar
  11. 11.
    V. A. Kurakin, V. A. Piven’, A. B. Zakharov, et al., “Volume and surface parameters of hydrogen reaction with molten palladium,” Fiz. Metal. Metalloved., No. 6, 125–129 (1991).Google Scholar
  12. 12.
    L. L. Murav’ev, A. B. Vandyshev, and V. M. Makarov, “Modelling of membrane extraction of hydrogen from the products of steam conversion of hydrocarbons,” TOKhT, 33, No. 3, 286–291 (1999).Google Scholar
  13. 13.
    M. K. Pis’men, Production of Hydrogen in the Oil Processing Industry [in Russian], Moscow (1976).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2007

Authors and Affiliations

  • A. B. Vandyshev
    • 1
  • V. A. Kulikov
    • 1
  • S. N. Nikishin
    • 1
  1. 1.Institute of Engineering, Ural SectionRussian Academy of Sciences (IMASh UrO RAN)Ekaterinburg

Personalised recommendations