Hydrocracking residue meeting physicochemical and chemical composition requirements for hydrocracking oil feedstock was studied. The optimal scheme for producing API group HI base oils was determined.
Similar content being viewed by others
References
D. L. Rakhmankulov, L. V. Dolmatov, P. L. Ol’khov, et al., Marketing of Oil Products. Vol. I. General Information About Oil and Oil Products [in Russian], Rhimiya, Moscow, 2003, 160 pp.
API Classification; http://otusholding.com/base-oil-clasiffication.php (accessed Aug. 15, 2019).
S. V. Pokrovskaya, Oil Refining Technology. Production of Petroleum Oils: Text and Methods [in Russian], Novopolotsk, PGU, Moscow, 2008, 320 pp.
N. I. Chemozhukov, in: Oil and Gas Refining Technology. Parr 3. Purification and Separation of Oil Feedstock, Production of Commercial Oil Products: Study Guide [in Russian], A. A. Gureev and B. I. Bondarenko (eds.), Rhimiya, Moscow, 1978, 424 pp.
S. A. Akhmetov, Deep Refining Technology for Oil: Study Guide [in Russian], Ufa, Gilem, Moscow, 2002, 672 pp.
Acknowledgment
The study was financially supported by the Ministry of Science and Higher Education of the Russian Federation (unique project identifier REME1157717X0252).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Khimiya i Tekhnologiya ropily i Masel, No. 5, pp. I6— 19, September— October, 2019.
Rights and permissions
About this article
Cite this article
Tonkonogov, B.P., Bagdasarov, L.N. & Serafin, T.S. Quality of Base Oils Produced From Hydrocracking Residue. Chem Technol Fuels Oils 55, 530–535 (2019). https://doi.org/10.1007/s10553-019-01062-0
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10553-019-01062-0