Advertisement

Chemistry and Technology of Fuels and Oils

, Volume 46, Issue 4, pp 271–280 | Cite as

Selecting construction materials in developing new and modernizing existing oil refinery equipment

  • V. A. Kachanov
  • Yu. B. Danilov
  • E. K. Gvozdikova
  • T. E. Shepil’
Article
  • 129 Downloads

Approaches to selecting construction and gasket materials for developing new and modernizing existing oil refinery equipment and the results of corrosion-electrochemical studies are presented.

Keywords

Heat Exchanger Hydrogen Sulfide Crevice Corrosion Steel 08X13 Plate Heat Exchanger 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    P. Dillon, Oil and Gas J., 155-157 (1977).Google Scholar
  2. 2.
    A. L. Belinkii, M. M. Kristal’, S. M. Kutepov, et al., Khim. Neft. Mashinostroenie, No. 8, 42 (1984).Google Scholar
  3. 3.
    R. W. Nichols, Pressure Vessel Design and Production Technology [Russian translation], Mashinostroenie, Moscow (1975).Google Scholar
  4. 4.
    A. N. Sukhotin, A. V. Shreider, and Yu. I. Archakov, Oil Refining Industry Manual [in Russian], Vol. 9, Khimiya, Moscow (1974).Google Scholar
  5. 5.
    A. V. Shreider, I. S. Shparber, and Yu. I. Archakov, Effect of Hydrogen on Petroleum and Chemical Equipment [in Russian], Mashinostroenie, Moscow (1976).Google Scholar
  6. 6.
    A. V. Shreider, V. G. D’yakov, and I. S. Shparber, High-Temperature Hydrogen Sulfide Corrosion of Oil Refinery Equipment and Protection against It [in Russian], TsNIITEneftekhim, Moscow (1972).Google Scholar
  7. 7.
    I. S. Shparber and A. V. Shreider, Low-Temperature Hydrogen Sulfide Failure of Steels in Refining of Crude Oil and Methods of Protection [in Russian], TsNIITEneftikhim, Moscow (1974).Google Scholar
  8. 8.
    A. N. Sukhotin and Yu. I. Archakov (eds.), The Oil Refining Industry. A Manual [in Russian], Khimiya, Moscow (1990).Google Scholar
  9. 9.
    I. A. Zaks, Electrodes for Arc Welding of Steel and Nickel Alloys [in Russian], Welcome, St. Petersburg (1996).Google Scholar
  10. 10.
    L. P. Pertsev, V. A. Kachanov, et al., Khim. Neftyan. Mashinostroenie, No. 9, 22 (1987).Google Scholar
  11. 11.
    V. A. Kachanov, Yu. B. Danilov, et al., Korroziya: Mater., Zashchita, No. 1 (2007).Google Scholar
  12. 12.
    V. A. Kachanov, L. A. Klyushnikova, and T. A. Balak, Vestn. GPTU, No. 115, 61 (2000).Google Scholar
  13. 13.
    I. L. Rozenfel’d, Corrosion and Protection of Metals [in Russian], Metallurgiya, Moscow (1978).Google Scholar

Copyright information

© Springer Science+Business Media, Inc. 2010

Authors and Affiliations

  • V. A. Kachanov
    • 1
  • Yu. B. Danilov
    • 1
  • E. K. Gvozdikova
    • 1
  • T. E. Shepil’
    • 1
  1. 1.UkrNIIkhimmash CoKhar’kovUkraine

Personalised recommendations