Correction to: A direct displacement‑based seismic design method using a MDOF equivalent system: application to R/C framed structures

Correction to: Bulletin of Earthquake Engineering https://doi.org/10.1007/s10518-020-00857-5

This erratum is published as proofing errors were introduced in Fig. 1 during typesetting, which needs to be correctly read as follows:

Fig. 1
figure1

The MDOF structure (a) and its SDOF representation in the original DDBD (Sullivan et al. 2012) method (b)

The original article has thus been updated with the corrections.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Dimitri E. Beskos.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Muho, E.V., Qian, J. & Beskos, D.E. Correction to: A direct displacement‑based seismic design method using a MDOF equivalent system: application to R/C framed structures. Bull Earthquake Eng 18, 4189–4190 (2020). https://doi.org/10.1007/s10518-020-00887-z

Download citation