Skip to main content
SpringerLink
Log in

Three-dimensional magneto-thermo-elastic analysis of functionally graded cylindrical shell

  • Published:
Applied Mathematics and Mechanics Aims and scope Submit manuscript

Abstract

The present paper presents the three-dimensional magneto-thermo-elastic analysis of the functionally graded cylindrical shell immersed in applied thermal and magnetic fields under non-uniform internal pressure. The inhomogeneity of the shell is assumed to vary along the radial direction according to a power law function, whereas Poisson’s ratio is supposed to be constant through the thickness. The existing equations in terms of the displacement components, temperature, and magnetic parameters are derived, and then the effective differential quadrature method (DQM) is used to acquire the analytical solution. Based on the DQM, the governing heat differential equations and edge boundary conditions are transformed into algebraic equations, and discretized in the series form. The effects of the gradient index and rapid temperature on the displacement, stress components, temperature, and induced magnetic field are graphically illustrated. The fast convergence of the method is demonstrated and compared with the results obtained by the finite element method (FEM).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Xing, Y. and Liu, B. A differential quadrature analysis of dynamic and quasi-static magnetothermo-elastic stresses in a conducting rectangular plate subjected to an arbitrary variation of magnetic field. International Journal of Engineering Science, 48, 1944–1960 (2010)

    Article  MATH  Google Scholar 

  2. Farid, M., Zahednejad, P., and Malekzadeh, P. Three-dimensional temperature dependent free vibration analysis of functionally graded material curved panels resting on two-parameter elastic foundation using a hybrid semi-analytic, differential quadrature method. Materials and Design, 31, 2–13 (2010)

    Article  Google Scholar 

  3. Xin, L., Dui, G., Yang, S., and Zhou, D. Solution for behavior of a functionally graded thick-walled tube subjected to mechanical and thermal loads. International Journal of Mechanical Science, 98, 70–79 (2015)

    Article  Google Scholar 

  4. Alibeigloo, A. Elasticity solution of functionally graded carbon-nanotube-reinforced composite cylindrical panel with piezoelectric sensor and actuator layers. Composite: Part B, 87, 182–187 (2015)

    Google Scholar 

  5. Jabbari, M., Nejad, M. Z., and Ghannad, M. Thermo-elastic analysis of functionally graded rotating thick cylindrical pressure vessels with variable thickness under mechanical loading. International Journal of Engineering Science, 96, 1–8 (2015)

    Article  MathSciNet  Google Scholar 

  6. Kiani, K. Thermo-mechanical analysis of functionally graded plate-like nanorotors: a surface elasticity model. International Journal of Mechanical Sciences, 106, 39–49 (2016)

    Article  Google Scholar 

  7. Jamaludin, S. N. S., Basri, S., Hussain, A., Al-Othmany, D. S., Mustapha, F., and Nuruzzaman, D. M. Three-dimensional finite element modeling of thermomechanical problems in functionally graded hydroxyapatite/titanium plate. Mathematical Problems in Engineering, 2014, 1–12 (2014)

    Article  Google Scholar 

  8. Prakash, T. and Ganapathi, M. Asymmetric flexural vibration and thermo-elastic stability of FGM circular plates using finite element method. Composite: Part B, 37, 642–649 (2006)

    Article  Google Scholar 

  9. Feng, S. Z., Cui, X. Y., Li, G. Y., Feng, H., and Xu, F. X. Thermo-mechanical analysis of functionally graded cylindrical vessels using edge-based smoothed finite element method. International Journal of Pressure Vessels and Piping, 111-112, 302–309 (2013)

    Article  Google Scholar 

  10. Ching, H. K. and Yen, S. C. Meshless local Petrov-Galerkin analysis for 2D functionally graded elastic solids under mechanical and thermal loads. Composite: Part B, 36, 223–240 (2005)

    Article  Google Scholar 

  11. Chen, Y. Z. and Lin, X. Y. Elastic analysis for thick cylinders and spherical pressure vessels made of functionally graded materials. Computational Materials Science, 44, 581–587 (2008)

    Article  Google Scholar 

  12. Zafarmand, H. and Kadkhodayan, M. Three dimensional elasticity solution for static and dynamic analysis of multi-directional functionally graded thick sector plates with general boundary conditions. Composite: Part B, 69, 592–602 (2015)

    Article  Google Scholar 

  13. Jabbari, M., Sohrabpour, S., and Eslami, M. R. Mechanical and thermal stresses in a functionally graded hollow cylinder due to radially symmetric loads. International Journal of Pressure and Vessels, 79, 493–497 (2002)

    Article  MATH  Google Scholar 

  14. Loghman, A. and Pars, H. Exact solution for magneto-thermo-elastic behavior of double-walled cylinder made of an inner FGM and an outer homogeneous layer. International Journal of Mechanical Sciences, 88, 93–99 (2014)

    Article  Google Scholar 

  15. Mehditabar, A. Three-dimensional magneto-thermo-elastic analysis of functionally graded truncated conical shells. International Journal of Engineering, 26, 1445–1460 (2013)

    Google Scholar 

  16. Zenkour, A. M. and Abbas, I. A. Electro-magneto-thermo-elastic response of infinite functionally graded cylinders without energy dissipation. Journal of Magnetic Materials, 395, 123–129 (2015)

    Article  Google Scholar 

  17. Zhang, L. and Li, X. W. Buckling and vibration analysis of functionally graded magneto-electrothermo- elastic circular cylindrical shells. Applied Mathmatical Modelling, 37, 2279–2292 (2013)

    Article  MATH  Google Scholar 

  18. Ezzat, M. and Atef, H. M. Magneto-electro viscoelastic layer in functionally graded materials. Composite: Part B, 42, 832–841 (2011)

    Article  Google Scholar 

  19. Kumar, R., Sharma, N., and Lata, P. Thermomechanical interactions in transversely isotropic magneto-thermo-elastic medium with vacuum and with and whithout energy dissipation with combined effects of rotation, vacuum and two temperature. Applied Mathematical Modelling, 40, 1–16 (2016)

    Article  MathSciNet  Google Scholar 

  20. Rad, A. B. and Shariyat, M. Thermo-magneto-elasticity analysis of variable thickness annular FGM plates with asymmetric shear and normal loads and non-uniform elastic foundations. Archives of Civil and Mechanical Engineering, 16, 448–466 (2016)

    Article  Google Scholar 

  21. John, K. Electromagnetics, McGraw-Hill Book Company, Inc., New York (1941)

    MATH  Google Scholar 

  22. Strang, G. Introduction to Applied Mathematics, Wellesley-Cambridge Press, Massachusetts (1986)

    MATH  Google Scholar 

  23. Jane, K. C. and Wu, Y. H. A generalized thermo-elasticity problem of multilinear conical shells. International Journal of Solids and Structures, 41, 2205–2233 (2004)

    Article  MATH  Google Scholar 

  24. Shu, C. Differential Quadrature and Its Application in Engineering, Springer-Verlag, London (2000)

    Book  MATH  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, School of Mechanical Engineering, Tarbiat Modares University, Tehran, 14115-111, Iran

    A. Mehditabar, G. H. Rahimi & S. Ansari Sadrabadi

Authors
  1. A. Mehditabar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. G. H. Rahimi
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. S. Ansari Sadrabadi
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to S. Ansari Sadrabadi.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mehditabar, A., Rahimi, G.H. & Ansari Sadrabadi, S. Three-dimensional magneto-thermo-elastic analysis of functionally graded cylindrical shell. Appl. Math. Mech.-Engl. Ed. 38, 479–494 (2017). https://doi.org/10.1007/s10483-017-2186-6

Download citation

  • Received:

  • Revised:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10483-017-2186-6

Key words

Chinese Library Classification

2010 Mathematics Subject Classification

Search

Navigation