Abstract
Based on the Hamilton principle and the moderate deflection beam theory, discretizing the helicopter blade into a number of beam elements with 15 degrees of freedom, and using a quasi-steady aero-model, a nonlinear coupled rotor/fuselage equation is established. A periodic solution of blades and fuselage is obtained through aeroelastic coupled trim using the temporal finite element method (TEM). The Peters dynamic inflow model is used for vehicle stability. A program for computation is developed, which produces the blade responses, hub loads, and rotor pitch controls. The correlation between the analytical results and related literature is good. The converged solution simultaneously satisfies the blade and the vehicle equilibrium equations.
Similar content being viewed by others
References
Johnson, Wayne. Helicopter Theory, Princeton University Press, Princeton (1980)
Smith, E. C. and Chopra, I. Aeroelastic response and blade loads of a composite rotor in forward flight. Proceedings of the 33rd Structures, Structure Dynamic, and Materials Conference, Dallas, Texas, 1996–2014 (1992)
Yang, W. D. Aeroelastic Coupled Analysis and Optimization of Rotor Blade with Swept Tips (in Chinese), Ph. D. dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing (1995)
Warmbrodt, W. and Friedmann, P. P. Formulation of coupled rotor/fuselage equations of motion. Vertica 3(3–4), 245–271 (1979)
Friedmann, P. P. Numerical methods for the treatment of periodic systems with applications to structural dynamics and helicopter rotor dynamics. Computers & Structures 35(4), 329–347 (1990)
Cheng, Y. M., Ren, G. X., Zheng, Z. C., and Yu, X. Helicopter coupled rotor/fuselage analysis of aeroelastic response (in Chinese). Chinese Journal of Applied Mechanics 16(2), 32–36 (1999)
Han, D., Gao, Z., and Wang, H. W. Rotor aeroelastic stability modeling based on inertial coordinate frame (in Chinese). Journal of Nanjing University of Aeronautics and Astronautics 37(4), 417–420 (2005)
Sivaner, N. T. and Chopra, I. Dynamic stability of a rotor blade using finite element analysis. AIAA Journal 20(5), 716–723 (1982)
Xiang, J. W., Zhang, C. L., and Wang, S. C. Rotor blade dynamic optimization for reduced helicopter vibration (in Chinese). Journal of Aerospace Power 11(2), 125–128 (1996)
Hodges, D. H. and Dowell, E. H. Nonlinear Equations of Motion for the Elastic Bending and Torsion of Twisted Nonuniform Rotor Blades, NASA TN D-7818, Washington (1974)
Hu, X. Y. and Han, J. L. Aeroelastic mechanical analysis of bearingless rotor with elastomeric lag dampers (in Chinese). Journal of China University of Mining & Technology 37(4), 514–518 (2008)
Zhang, X. G. Dynamic Design of Helicopter (in Chinese), Aviation Industry Press, Beijing (1995)
Peters, D. A. and HaQuang, N. Dynamic inflow for practical applications. Journal of the American Helicopter Society 33(4), 64–68 (1988)
McNulty, M. J. and Bousman, W. G. Integrated Technology Rotor Methodology Assessment Workshop, NASA CP-10007, Washington (1983)
Author information
Authors and Affiliations
Corresponding author
Additional information
Communicated by Li-qun CHEN
Project supported by the National Natural Science Foundation of China (No. 10872089)
Rights and permissions
About this article
Cite this article
Hu, Xy., Han, Jl. & Yu, M. Nonlinear aeroelastic coupled trim and stability analysis of rotor-fuselage. Appl. Math. Mech.-Engl. Ed. 31, 237–246 (2010). https://doi.org/10.1007/s10483-010-0211-9
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10483-010-0211-9