Correction to: Appl Compos Mater
The original version of this article unfortunately contained an error.
There was an error regarding the captions of Figures 11 and 12, which are mistakenly interchanged. Although the cross-references for these figures are accurately described in the text, the correct figure captions should be:
Fig. 11 FE Model of the composite beam with the steel tubes
Fig. 12 Deformation pattern of the girder under static loading, units in mm
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at https://doi.org/10.1007/s10443-018-9691-3
Rights and permissions
About this article
Cite this article
Papapetrou, V.S., Tamijani, A.Y., Brown, J. et al. Correction to: Design Optimization of Hybrid FRP/RC Bridge. Appl Compos Mater 26, 271 (2019). https://doi.org/10.1007/s10443-018-9704-2
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-018-9704-2