Abstract
This article introduces an investigation of path planning with ply orientation information for automatic fiber placement (AFP) on open-contoured mesh surface. The new method makes use of the ply orientation information generated by loading characteristics on surface, divides the surface into several zones according to the ply orientation information and then designs different fiber paths in different zones. This article also gives new idea of up-layer design in order to make up for defects between parts and improve product’s strength.
Similar content being viewed by others
References
Wang, X., Lulin, A., Liyan, Z., Laishui, Z.: Uniform coverage of fibres over open-contoured freeform structure based on arc-length parameter. Chin. J. Aeronaut. 06, 571–577 (2008)
Lin, S.: Automatic tape laying machine automatic fiber laying machine (ATL/AFP) —— Key design of modern large aircraft manufacturing. World Manuf. Technol. Equip. Mark. 06, 78–83 (2009)
Jun, X., Yong, L., Long, L.J.: Application of automatic laying technology in the manufacturing of large aircraft composite structures. Aviat. Manuf. Technol. 01, 50–53 (2008)
Yuan, Z.: Generation material and generation aircraft -- Cao Chunxiao academician evaluates China's large aircraft project from the material evolution history. Aviat. Manuf. Technol. 01, 36–39 (2008)
Lewis, H.W., Romero, J.E. Composite tape placement apparatus with natural path generation means. US US4696707 (1987)
Shirinzadeh, B., Cassidy, G., Oetomo, D., et al.: Trajectory generation for open contoured structures in robotic fiber placement. Robot. Comput. Integr. Manuf. 23, 380–394 (2007)
Duan, Y.G., Ge, Y.M., Meng, Y., et al.: Trajectory planning of fiber placement based on controlled angle and interval. Acta Aeronautica et Astronautica Sinica. 36(10), 3475–3482 (2015)
Xiong, W.L., Xiao, J., Wang, X.F., et al.: Algorithm of adaptive path planning for automated placement on meshed surface. Acta Aeronautica et Astronautica Sinica. 34(2), 434–441 (2013)
Yuan, W.P.: Research on fiber placement path planning on free surface based on layer loading information. Nanjing University of Aeronautics & Astronautics, Nanjing (2011)
Waldhart, C., Ribbens, C., Jones, R.M.: Analysis of tow-placed, variable-stiffness laminates design of tow-placed, variable-stiffness laminates. Virginia Tech, Blacksburg (1996)
Junfei, L.: Research on fiber placement trajectory design algorithm for the free-form surface with given ply orientation information. Nanjing University of Aeronautics & Astronautics, Nanjing (2013)
Wang, Y.Y., AnJi, C.: Robot path planning based on wave collision algorithm. J. North Univ. China (Nat. Sci. Ed.) 35(3), 286–292 (2014)
Lei, D.J., Tang, J.C., Liu, L.R., et al.: Application of an improved path searching algorithm for robot soccer based in diffusion rules. Comput. Modernization. 11, 19–23 (2010)
Meng, S.: Research on 3D shape segmentation based on diffusion geometry. Beijing Jiaotong University, Beijing (2015)
Crane, K., Weischedel, C., Wardetzky, M.: Geodesics in Heat. ACM Trans. Graph. 32(5), 13–15 (2013)
Luo, H.: Research on automated tape-laying path calculation for composites based on STL file. Nanjing University of Aeronautics & Astronautics, Nanjing (2009)
Lin, F.: The key technology about automatic fiber placement. Modular Mach. Tool Autom. Manuf. Tech. 03, 25–26 (2005)
Acknowledgments
The work reported in this article was supported by National Natural Science Foundation of China under grant Nos. 51075206 and 51575266.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pei, J., Wang, X., Pei, J. et al. Path Planning Based on Ply Orientation Information for Automatic Fiber Placement on Mesh Surface. Appl Compos Mater 25, 1477–1490 (2018). https://doi.org/10.1007/s10443-018-9678-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10443-018-9678-0