Advertisement

Acta Mechanica Sinica

, Volume 32, Issue 1, pp 54–63 | Cite as

SUPG finite element method based on penalty function for lid-driven cavity flow up to \(Re = 27500\)

  • Da-Guo WangEmail author
  • Qing-Xiang Shui
Research Paper

Abstract

A streamline upwind/Petrov–Galerkin (SUPG) finite element method based on a penalty function is proposed for steady incompressible Navier–Stokes equations. The SUPG stabilization technique is employed for the formulation of momentum equations. Using the penalty function method, the continuity equation is simplified and the pressure of the momentum equations is eliminated. The lid-driven cavity flow problem is solved using the present model. It is shown that steady flow simulations are computable up to \(Re = 27500\), and the present results agree well with previous solutions. Tabulated results for the properties of the primary vortex are also provided for benchmarking purposes.

Keywords

Streamline upwind/Petrov–Galerkin (SUPG) finite element method Lid-driven cavity flow Penalty function method High Reynolds number 

Notes

Acknowledgments

This project was supported by the National Natural Science Foundation of China (Grants 41372301 and 51349011) and the Preeminent Youth Talent Project of Southwest University of Science and Technology (Grant 13zx9109).

References

  1. 1.
    Bruneau, C.H., Saad, M.: The 2D lid-driven cavity problem revisited. Comput. Fluids 35, 326–348 (2006)CrossRefzbMATHGoogle Scholar
  2. 2.
    Poliashenko, M., Aidun, C.K.: A direct method for computation of simple bifurcations. J. Comput. Phys. 121, 246–260 (1995)CrossRefMathSciNetzbMATHGoogle Scholar
  3. 3.
    Peng, Y.F., Shiau, Y.H., Hwang, R.R.: Transition in a 2-D lid-driven cavity flow. Comput. Fluids 32, 337–352 (2003)CrossRefzbMATHGoogle Scholar
  4. 4.
    Shui, Q.X., Wang, D.G.: Numerical simulation for Navier-Stokes equations by projection/characreistic-based operator-splitting finite element method. Chin. J. Theor. Appl. Mech. 46, 369–381 (2014)Google Scholar
  5. 5.
    Barragy, E., Carey, G.F.: Stream function-vorticity driven cavity solutions using p finite elements. Comput. Fluids 26, 453–468 (1997)CrossRefzbMATHGoogle Scholar
  6. 6.
    Hachem, E., Rivaux, B., Kloczko, T., et al.: Stabilized finite element method for incompressible flows with high Reynolds number. J. Comput. Phys. 229, 8643–8665 (2010)CrossRefMathSciNetzbMATHGoogle Scholar
  7. 7.
    Bassi, F., Crivellini, A., Di Pietro, D.A., et al.: An artificial compressibility flux for the discontinuous Galerkin solution of the incompressible Navier-Stokes equations. J. Comput. Phys 218, 794–815 (2006)CrossRefMathSciNetzbMATHGoogle Scholar
  8. 8.
    Botti, L., Di Pietro, D.A.: A pressure-correction scheme for convection-dominated incompressible flows with discontinuous velocity and continuous pressure. J. Comput. Phys. 230, 572–585 (2011)CrossRefMathSciNetzbMATHGoogle Scholar
  9. 9.
    Brooks, A.N., Hughes, T.J.R.: Streamline upwind/Petrov–Galerkin formulations for convection dominated flows with particular emphasis on the incompressible Navier-Stokes equations. Comput. Methods Appl. Mech. Eng. 32, 199–259 (1982)CrossRefMathSciNetzbMATHGoogle Scholar
  10. 10.
    Babuška, I.: The finite element method with penalty. Math. Comput. 27, 221–228 (1973)CrossRefzbMATHGoogle Scholar
  11. 11.
    Tezduyar, T.E., Liou, J., Ganjoo, D.K.: Petrov–Galerkin methods on multiply-connected domains for the vorticity-stream function formulation of the incompressible Navier-Stokes equations. J. Numer. Methods Fluids 8, 1269–1290 (1988)Google Scholar
  12. 12.
    Huang, C., Zhou, D., Bao, Y.: A semi-implicit three-step method based on SUPG finite element formulation for flow in lid driven cavities with different geometries. J. Zhejiang Univ. Sci. A 12, 33–45 (2011)CrossRefGoogle Scholar
  13. 13.
    Belytschko, T., Liu, W.K., Moran, B., et al.: Nonlinear Finite Elements for Continua and Structures. John Wiley & Sons, Chichester (2013)zbMATHGoogle Scholar
  14. 14.
    Gunzburger, M.D.: Finite Element Methods for Viscous Incompressible Flows. Academic Press, San Diego (1989)zbMATHGoogle Scholar
  15. 15.
    Singh, A., Singh, I.V., Prakash, R.: Numerical analysis of fluid squeezed between two parallel plates by meshless method. Comput. Fluids 36, 1460–1480 (2007)CrossRefMathSciNetzbMATHGoogle Scholar
  16. 16.
    Nithiarasu, P.: An efficient artificial compressibility (AC) scheme based on the characteristic based split (CBS) method for incompressible flows. Int. J. Numer. Methods Eng. 56, 1815–1845 (2003)CrossRefzbMATHGoogle Scholar
  17. 17.
    Ghia, U., Ghia, K.N., Shin, C.T.: High-Re solutions for incompressible flow using the Navier–Stokes equations and a multigrid method. J.Comput. Phys. 48, 387–411 (1982)CrossRefzbMATHGoogle Scholar
  18. 18.
    Wahba, E.M.: Steady flow simulations inside a driven cavity up to Reynolds number 35,000. Comput. Fluids 66, 85–97 (2012)CrossRefMathSciNetGoogle Scholar
  19. 19.
    Erturk, E., Corke, T.C., Gökçöl, C.: Numerical solutions of 2-D steady incompressible driven cavity flow at high Reynolds numbers. Int. J. Numer. Methods Fluids 48, 747–774 (2005)CrossRefzbMATHGoogle Scholar
  20. 20.
    Erturk, E.: Discussions on driven cavity flow. Int. J. Numer. Methods Fluids 60, 275–294 (2009)CrossRefMathSciNetzbMATHGoogle Scholar
  21. 21.
    Gravemeier, V., Wall, W.A., Ramm, E.: A three-level finite element method for the instationary incompressible Navier–Stokes equations. Comput. Methods Appl. Mech. Eng. 193, 1323–1366 (2004)CrossRefMathSciNetzbMATHGoogle Scholar

Copyright information

© The Chinese Society of Theoretical and Applied Mechanics; Institute of Mechanics, Chinese Academy of Sciences and Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  1. 1.School of Environment and ResourcesSouthwest University of Science and TechnologyMianyangChina

Personalised recommendations