Abstract
Dynamic stress intensity factors are evaluated for thick-walled cylinder with a radial edge crack under internal impulsive pressure. Firstly, the equation for stress intensity factors under static uniform pressure is used as the reference case, and then the weight function for a thick-walled cylinder containing a radial edge crack can be worked out. Secondly, the dynamic stresses in uncracked thick-walled cylinders are solved under internal impulsive pressure by using mode shape function method. The solution consists of a quasi-static solution satisfying inhomogeneous boundary conditions and a dynamic solution satisfying homogeneous boundary conditions, and the history and distribution of dynamic stresses in thick-walled cylinders are derived in terms of Fourier–Bessel series. Finally, the dynamic stress intensity factor equations for thick-walled cylinder containing a radial edge crack subjected to internal impulsive pressure are given by dynamic weight function method. The finite element method is utilized to verify the results of numerical examples, showing the validity and feasibility of the proposed method.
Similar content being viewed by others
References
Bowie O.L., Neal D.M.: Modified mapping collocation technique for accurate calculation of stress intensity factors. Int. J. Fract. Mech. 6(2), 199–206 (1970)
Kirkhope K.J., Bell R., Kirkhope J.: Stress intensity factor equations for single and multiple cracked pressurized thick-walled cylinders. Int. J. Pres. Ves. Piping. 41(1), 103–111 (1990)
Delale F., Erdogan F.: Stress intensity factors in a hollow cylinder containing a radial crack. Int. J. Fract. 20(4), 251–265 (1982)
Underwood J.H.: A compliance K-calibration for a pressurized thick-walled cylinder with a radial crack. Eng. Fract. Mech. 4(2), 231–244 (1972)
Fan, T.Y.: Foundation of Fracture Theory. Science Press, Beijing (2003) (in Chinese)
Song C.M., Vrcelj Z.: Evaluation of dynamic stress intensity factors and T-stress using the scaled boundary finite element method. Eng. Fract. Mech. 75(8), 1960–1980 (2008)
Guo R.P., Liu G.T., Fan T.Y.: Semi-elliptic surface crack in an elastic solid with finite size under impact loading. Acta Mech. Solida Sinica. 19(2), 122–127 (2006)
Lu X., Wu W.L.: A subregion DRBEM formulation for the dynamic analysis of two-dimensional cracks. Math. Comput. Model. 43(1), 76–88 (2006)
Zhong M., Zhang Y.Y.: The analysis of dynamic stress intensity factor for semi-circular surface crack using time-domain BEM formulation. Appl. Math. Mech. 22(11), 1344–1351 (2001)
Cheng Y.M., Ji X., He P.F.: Infinite similar boundary element method for dynamic fracture mechanics. Acta Mech. Sinica. 36(1), 43–48 (2004) (in Chinese)
Lu J.F., Chen Z.Y.: Dynamic response of a broken crack to SH waves. Acta Mechanica Solida Sinica. 25(3), 315–319 (2004) (in Chinese)
Sladek J., Sladek V.: A boundary integral equation method for dynamic crack problems. Eng. Fract. Mech. 27(3), 269–277 (1987)
Rizzo F.J., Shippy D.J.: A boundary integral equation method for radiation and scattering of elastic waves in three dimensions. Int. J. Numer. Methods Eng. 21(1), 115–129 (1985)
Wang Z.Q.: The calculation of dynamic stress intensity factors for a cracked thick-walled cylinder. Int. J. Fract. 73(4), 359–366 (1995)
Bueckner H.F.: A novel principle for the computation of stress intensity factors. Z. Angew Math. Mech. 50(9), 529–546 (1970)
Rice J.R.: Some remarks on elastic crack-tip stress fields. Int. J. Solids Struct. 8(6), 751–758 (1972)
Chen A.J., Zeng W.J.: Weight function for stress intensity factors in rotating thick-walled cylinder. Appl. Math. Mech. 27(1), 29–35 (2006)
Wang X., Gong Y.N.: A theoretical solution for axially symmetric problems in elastodynamics. Acta Mech. Sinica 7(3), 275–282 (1991)
Author information
Authors and Affiliations
Corresponding author
Additional information
The project supported by the China Aviation Industry Corporation I Program (ATPD-1104-02).
Rights and permissions
About this article
Cite this article
Chen, A., Liao, L. & Zhang, D. Analysis of dynamic stress intensity factors of thick-walled cylinder under internal impulsive pressure. Acta Mech Sin 25, 803–809 (2009). https://doi.org/10.1007/s10409-009-0297-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10409-009-0297-8