Abstract
Nowadays, the amount of chrome-tanned leather scraps from the leather industry is increasing rapidly due to diminishing interest in their utility in related areas. These kinds of wastes cause considerable negative, environmental effects, and therefore, producers should find new methods of recycling and/or disposal. It is speculated that leather scraps may be a valuable additive in rubber-based materials thanks to their similar elastic properties. In this study, chrome-tanned leather wastes have been incorporated into natural rubber and styrene-butadiene rubber and their blends in various ratios by using a Banbury mixer and two-roll mill, subsequently. Effects of the wastes on rheological, thermal, mechanical, aging, and morphological properties of the blends were investigated. Different penetration ability and distinct cure rates of the two rubbers caused interesting rheological characteristics. Original mechanical properties of styrene-butadiene rubber and its blends were retained after waste incorporation. Furthermore, thermal aging resistance of natural rubber matrix could be improved. The most significant effect of leather particles is the enhancement of the tear strength of all the vulcanizates by shifting the tear mechanism towards the tortuous fracture pathway.
Similar content being viewed by others
References
Mittal V, Kim JK, Pal K (2011) Advanced structured materials: recent advances in elastomeric nanocomposites. Springer, UK
White J, De SK, Naskar K (2008) Rubber technologist’s handbook, vol 2. Smithers Rapra Technology Limited, Shrewsbury
Simpson RB (2008) Rubber basics. Smithers Rapra Technology Limited, Shrewsbury
El-Sabbagh SH, Mohamed OA (2011) Recycling of chrome-tanned leather waste in acrylonitrile butadiene rubber. J Appl Polym Sci 12:979–988. https://doi.org/10.1002/app.33692
Ramasami T, Sreeram KJ (2003) Sustaining tanning process through conservation, recovery and better utilization of chromium. Resour Conserv Recyc 38:185–212. https://doi.org/10.1016/S0921-3449(02)00151-9
Sivakumar V, Swaminhathan G, Rao GP, Muralidharan C, Mandal AB, Ramasami T (2010) Use of ultrasound in leather processing industry: effect of sonication on substrate and substances -New insights. Ultrason Sonochem 17:1054–1059. https://doi.org/10.1016/j.ultsonch.2009.10.012
Teklay A, Gebeyehu G, Getachew T, Yaynshet T, Sastry TP (2018) Conversion of finished leather waste incorporated with plant fibers into value added consumer products—an effort to minimize solid waste in Ethiopia. Clean Techn Environ Policy 13(2):11–13. https://doi.org/10.1007/s10098-016-1327-4
Sivaprakash K, Maharaja P, Pavithra S, Boopathy R, Sekaran G (2017) Preparation of light weight constructional materials from chrome containing buffing dust solid waste generated in leather industry. J Mater Cycles Waste Manag 19:928–938. https://doi.org/10.1007/s10163-016-0494-z
Senthil R, Sastry TP, Saraswathy G, Das BN, Gobi N (2018) Leather insole with acupressure effect: new perspectives. J Polym Environ 26(1):175–182. https://doi.org/10.1007/s10924-016-0930-0
Andreopoulos AG, Tarantili PA (2000) Waste leather particles as a filler for poly(vinyl chloride) plastisols. J Macromol Sci A 37(11):1353–1362. https://doi.org/10.1081/MA-100101158
Ambone T, Joseph S, Deenadayalan E, Mishra S, Jaisankar S, Saravanan P (2018) Polylactic acid (PLA) biocomposites filled with waste leather buff (WLB). J Polym Environ 25(4):1099–1109. https://doi.org/10.1007/s10924-016-0891-3
Chronska K, Przepiorkowska A (2008) Buffing dust as a filler of carboxylated butadiene–acrylonitrile rubber and butadiene acrylonitrile rubber. J Hazard Mater 151:348–355. https://doi.org/10.1016/j.jhazmat.2007.05.087
Przepiorkowska A, Chronska K, Zaborski M (2007) Chrome-tanned leather shavings as a filler of butadiene–acrylonitrile rubber. J Hazard Mater 141:252–257. https://doi.org/10.1016/j.jhazmat.2006.06.136
CTC Report (2000) Wastes in the leather products industry. In: 14th meeting of the UNIDO leather panel, Zlin, Czech Republic
Ravichandran K, Natcimuthu N (2015) Natural rubber–leather composites. Polimeros Ciencia e Technologia 15(2):102–108. https://doi.org/10.1590/S0104-14282005000200008
Ferreira MJ, Freitas F (2010) The effect of leather fibers on the properties of rubber-leather composites. J Compos Mater 44(24):2801–2817. https://doi.org/10.1177/0021998310369597
Ravichandran K, Natcimuthu N (2005) Vulcanization characteristics and mechanical properties of natural rubber–scrap rubber compositions filled with leather particles. Polym Int 54:553–559. https://doi.org/10.1002/pi.1725
Ferreira MJ, Almeida MF, Freitas F (2011) Formulation and characterization of leather and rubber wastes composites. Polym Eng Sci 51:1418–1427. https://doi.org/10.1002/pen.21643
Sahoo S, Maiti M, Ganguly A, George JJ, Bhowmick AK (2007) Effect of zinc oxide nanoparticles as cure activator on the properties of natural rubber and nitrile rubber. J Appl Polym Sci 105(4):2407–2415. https://doi.org/10.1002/app.26296
Haroun AA, Masout RA, Bronco S (2006) Synthesis of citric acrylate oligomer and its in-situ reaction with chrome tanned collagen (Hide power). Macromol Symp 235:187–194. https://doi.org/10.1002/masy.20065322
Masoud RA, Haroun AA, El-Sayed NH (2006) Dyeing of chrome tanned collagen modified by in-situ grafting with 2-EHA and MAC. J Appl Polym Sci 101:174–179. https://doi.org/10.1002/app.23160
Ghosh P, Katare S, Patkar P, Caruthers JM, Venkatasubramanian V, Walker KA (2003) Sulfur vulcanization of natural rubber for benzothiazole accelerated formulations: from reaction mechanisms to a rational kinetic model. Rubber Chem Technol 76(3):592–693. https://doi.org/10.5254/1.3547762
Dick JS (2014) How to improve rubber compounds. Hanser Publishers, Munchen
Santos RJ, Agostini DLS, Cabrera FC, Budemberg ER, Job AE (2015) Recycling leather waste: preparing and studying on microstructure, mechanical and rheological properties of leather waste/rubber composites. Polym Compos 36(12):2275–2281. https://doi.org/10.1002/pc.23140
Ismail H, Mathialagan M (2011) Curing characteristics, morphological, tensile and thermal properties of bentonite-filled ethylene-propylene-diene monomer (EPDM) composites. Polym Plast Technol 50(14):1421–1428. https://doi.org/10.1080/03602559.2011.584244
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Şaşmaz, S., Karaağaç, B. & Uyanık, N. Utilization of chrome-tanned leather wastes in natural rubber and styrene-butadiene rubber blends. J Mater Cycles Waste Manag 21, 166–175 (2019). https://doi.org/10.1007/s10163-018-0775-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10163-018-0775-9