Skip to main content
SpringerLink
Log in

Mechanical, thermal, and biodegradation behaviors of poly(vinyl alcohol) biocomposite with reinforcement of oil palm frond fiber

  • ORIGINAL ARTICLE
  • Published:
Journal of Material Cycles and Waste Management Aims and scope Submit manuscript

Abstract

A biocomposite prepared from poly(vinyl alcohol) (PVA) and oil palm fiber (OPF) is proposed with clarification of intermolecular interactions, physical properties, and biodegradability behavior. OPF in this study was converted from oil palm frond, which can be counted as value-added agricultural waste. The OPF content in the biocomposite is varied from 5 to 25 phr and glycerol is used as plasticizer. Scanning electron micrograph presents the good dispersion of OPF in hydrophilic PVA matrix, even at high OPF content of 25 phr. This result provides the improved compressive strength and modulus for 2 and 2.5 times, respectively, as compared to plasticized PVA. The successfully induced rigidity structure of OPF to biocomposite system is also confirmed by increasing of glass transition and melting temperatures, but decreased degree of crystallinity at high contents of OPF (20 and 25 phr). Moreover, the biocomposite with 25 phr OPF exhibits the increase of water resistance at 60% relative humidity obviously. In this study, biodegradability behavior is also traced by Fourier transform infrared spectra which suggests the fast degradation of highly moisture-sensitive PVA as compared with the highly crystalline fibrous structure of OPF.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7

Similar content being viewed by others

References

  1. DeMerlis CC, Schoneker DR (2003) Review of the oral toxicity of polyvinyl alcohol (PVA). Food Chem Toxicol 41(3):319–326

    Article  Google Scholar 

  2. Jang J, Lee DK (2003) Plasticizer effect on the melting and crystallization behavior of polyvinyl alcohol. Polymer 44(26):8139–8146

    Article  Google Scholar 

  3. Jayasekara R, Harding I, Bowater I, Lonergan G (2005) Biodegradability of a selected range of polymers and polymer blends and standard methods for assessment of biodegradation. J Polym Environ 13(3):231–251

    Article  Google Scholar 

  4. Briassoulis D, Dejean C, Picuno P (2010) Critical review of norms and standards for biodegradable agricultural plastics, part II: composting. J Polym Environ 18(3):364–383

    Article  Google Scholar 

  5. Peijs T, Vught RJM, Govaert LE (1995) Mechanical properties of poly(vinyl alcohol) fibres and composites. Composites 26(2):83–90

    Article  Google Scholar 

  6. Lu J, Wang T, Drzal LT (2008) Preparation and properties of microfibrillated cellulose polyvinyl alcohol composite materials. Compos A 39(5):738–746

    Article  Google Scholar 

  7. Mohanty JR, Das SN, Das HC, Swain SK (2013) Effective mechanical properties of polyvinylalcohol biocomposites with reinforcement of date palm leaf fibers. Polym Compos 34(6):959–966

    Article  Google Scholar 

  8. Shinoj S, Visvanathan R, Panigrahi R (2010) Towards industrial utilization of oil palm fibre: physical and dielectric characterization of linear low density polyethylene composites and comparison with other fiber sources. Biosyst Eng 106:378–288

    Article  Google Scholar 

  9. Joseph S, Joseph K, Thomas S (2006) Green composites from natural rubber and oil palm fiber: physical and mechanical properties. Int J Polym Mater 55(11):925–945

    Article  Google Scholar 

  10. Al-Dulaimi AA, Wanrosli WD (2016) Isolation and characterization of nanocrystalline cellulose from totally chlorine free oil palm empty fruit bunch pulp. J Polym Environ 25(2):192–202

    Article  Google Scholar 

  11. Hasamudin W, Soom RM (2002) Road-making using oil palm fibre (BIT5). Malaysian Palm Oil Board Information Series, Kuala Lumpur, Malaysia. http://palmoilis.mpob.gov.my/publications/TOT/tt171.pdf. Accessed 8 Oct 2017

  12. Peppas NA, Merrill EW (1976) Differential scanning calorimetry of crystalline PVA hydrogels. J Appl Polym Sci 20(6):1457–1465

    Article  Google Scholar 

  13. Azahari NA, Othman N, Ismail H (2011) Biodegradation studies of polyvinyl alcohol/corn starch blend films in solid and solution media. J Phys Sci 22(2):15–31

    Google Scholar 

  14. Shehap AM (2008) Thermal and spectroscopic studies of polyvinyl alcohol/sodium carboxy methyl cellulose blends. Egypt J Solids 31(1):75–91

    Google Scholar 

  15. Gohil JM, Bhattacharya A, Ray P (2006) Studies on the crosslinking of poly(vinyl alcohol). J Polym Res 13(2):161–169

    Article  Google Scholar 

  16. van Soest JJG, de Wit D, Tournois H, Vliegenthart JFG (1994) The influence of glycerol on structural changes in waxy maize starch as studied by Fourier transform infra-red spectroscopy. Polymer 35(22):4722–4727

    Article  Google Scholar 

  17. Rajendran S, Sivakumar M, Subadevi R (2004) Investigations on the effect of various plasticizers in PVA-PMMA solid polymer blend electrolytes. Mater Lett 58(5):641–649

    Article  Google Scholar 

  18. Sudhamani SR, Prasad MS, Sankar KU (2003) DSC and FTIR studies on gellan and polyvinyl alcohol (PVA) blend films. Food Hydrocoll 17(3):245–250

    Article  Google Scholar 

  19. Priya B, Gupta VK, Pathania D, Singha AS (2014) Synthesis, characterization and antibacterial activity of biodegradable starch/PVA composite films reinforced with cellulosic fibre. Carbohydr Polym 109:171–179

    Article  Google Scholar 

  20. Patel AK, Bajpai R, Keller JM (2014) On the crystallinity of PVA/palm leaf biocomposite using DSC and XRD techniques. Microsyst Technol 20(1):41–49

    Article  Google Scholar 

  21. Majdzadeh-Ardakani K, Nazari B (2010) Improving the mechanical properties of thermoplastic starch/poly(vinyl alcohol)/clay nanocomposites. Compos Sci Technol 70(10):1557–1563

    Article  Google Scholar 

  22. Moshin M, Hossin A, Haik Y (2011) Thermal and mechanical properties of poly(vinyl alcohol) plasticized with glycerol. J Appl Polym Sci 122(5):3102–3109

    Article  Google Scholar 

  23. Cinelli P, Chiellini E, Gordon SH, Imam SH (2003) Characteristics and degradation of hybrid composite films prepared from PVA, starch and lignocellulosics. Macromol Symp 197:143–155

    Article  Google Scholar 

  24. Nakagaito AN, Yano H (2005) Novel high-strength biocomposites based on microfibrillated cellulose having nano-order-unit web-like network structure. Appl Phys A 80:155–159

    Article  Google Scholar 

  25. Ching KS, Ealid M, Ching YC, Haniff M, Khalid M, Beg MTH (2014) Preparation and characterisation of polyvinyl alcohol/oil palm empty fruit bunch fibre composite. Mater Res Innov 18(6):364–367

    Google Scholar 

  26. Yong KC, Ching YC, Mohamad A, Lim ZK, Chong KE (2015) Mechanical and thermal properties of chemical treated oil palm empty fruit bunches fiber reinforced polyvinyl alcohol composite. J Biobased Mater Bioenergy 9:231–235

    Article  Google Scholar 

  27. Yee TW, Choy LJ, Rahman WA (2011) Mechanical and water absorption properties of poly(vinyl alcohol)/sago pith waste biocomposites. J Compos Mater 45(11):1201–1207

    Article  Google Scholar 

Download references

Acknowledgements

The authors would like to thank the Graduate School of Kasetsart University, Kasetsart University Research and Development Institute (KURDI), and the Department of Packaging and Materials Technology for their financial support throughout the study.

Author information

Authors and Affiliations

  1. Department of Packaging and Materials Technology, Faculty of Agro-Industry, Kasetsart University, Bangkok, 10900, Thailand

    Nawapon Sukudom, Piyawanee Jariyasakoolroj, Lerpong Jarupan & Kittichai Tansin

Authors
  1. Nawapon Sukudom
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Piyawanee Jariyasakoolroj
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Lerpong Jarupan
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Kittichai Tansin
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Lerpong Jarupan.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Sukudom, N., Jariyasakoolroj, P., Jarupan, L. et al. Mechanical, thermal, and biodegradation behaviors of poly(vinyl alcohol) biocomposite with reinforcement of oil palm frond fiber. J Mater Cycles Waste Manag 21, 125–133 (2019). https://doi.org/10.1007/s10163-018-0773-y

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10163-018-0773-y

Keywords

Search

Navigation