In neurosurgical operations, proper craniotomy using retractors is necessary. Various surgical instruments are used for this purpose, including standard retractors and multipurpose head frame retractor systems. However, the conventional multipurpose head frame system is often not optimal for use in some craniotomies and postures because of its size and complexity of setting. We have invented a new omnidirectional tin-alloyed (ODT) ring retractor for craniotomy with malleability and shape memory characteristics to resolve these issues. It is principally elliptical in shape, approximately 30 × 20 cm in diameter, and sufficiently firm. Accordingly, this ODT ring can retract the surgical field in all directions. Here, we report our experiences of 281 neurosurgical craniotomies using this ODT ring retractor system in various craniotomy sites and postures. Our novel ODT ring retractor is useful because of its low profile, multidirectional retractability, and less obstructiveness with its malleability. It could be used with pediatric patients where strong traction is not desirable.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Tax calculation will be finalised during checkout.
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
Tax calculation will be finalised during checkout.
Beuriat PA, Jacquesson T, Jouanneau E, Berhouma M (2016) Headholders’ - complications in neurosurgery: a review of the literature and recommendations for its use. Neurochirurgie 62:289–294. https://doi.org/10.1016/j.neuchi.2016.09.005
Choudhari KA, Pherwani AA (2007) Sudden visual loss due to posterior ischemic optic neuropathy following craniotomy for a ruptured intracranial aneurysm. Neurol India 55:163–165
de Andrade Júnior FC, de Andrade FC, de Araujo Filho CM, Carcagnolo Filho J (1998) Dysfunction of the temporalis muscle after pterional craniotomy for intracranial aneurysms. Comparative, prospective and randomized study of one flap versus two flaps dieresis. Arq Neuropsiquiatr 56:200–205
Kadri PA, Al-Mefty O (2004) The anatomical basis for surgical preservation of temporal muscle. J Neurosurg 100:517–522. https://doi.org/10.3171/jns.2004.100.3.0517
Kang S, Yang Y, Kim T, Kim J (1997) Sudden unilateral blindness after intracranial aneurysm surgery. Acta Neurochir 139:221–226
Kawaguchi M, Sakamoto T, Furuya H, Ohnishi H, Karasawa J (1996) Pseudoankylosis of the mandible after supratentorial craniotomy. Anesth Analg 83:731–734
Moteki Y, Okada Y, Inoue T, Sato S, Kuwamoto K, Shima S, Niimi Y (2018) The availability of a tin-alloyed omnidirectional retractor-supporting ring for ventriculoperitoneal shunt laparotomy. World Neurosurg 109:110–114. https://doi.org/10.1016/j.wneu.2017.09.085
Okada T, Ishikawa T, Nishimura H, Suzuki A (2012) How much pressure is applied on the eye balls during craniotomy?: measurement with FlexiForce contact surface force sensor. No Shinkei Geka 40:1071–1077
Shintaro Arai TM, Mizutani T, Matsumoto M, Nakajo T, Sumi K, Sugiyama T (2018) Creating a practice model using actual surgical instruments and training for cerebrovascular surgery: from setup to performing the microscopic technique. Surg Cereb Stroke (Jpn) 46:469–472
Sugita K, Hirota T, Mizutani T, Mutsuga N, Shibuya M, Tsugane R (1978) A newly designed multipurpose microneurosurgical head frame. Techn note J Neurosurg 48:656–657. https://doi.org/10.3171/jns.1978.48.4.0656
Sugita K, Kobayashi S, Takemae T, Matsuo K, Yokoo A (1980) Direct retraction method in aneurysm surgery. Techn note J Neurosurg 53:417–419. https://doi.org/10.3171/jns.1980.53.3.0417
Yoneyama T, Kawamata T, Tanaka M, Yamaguchi K, Okada Y (2015) Omnidirectional retractor-supporting ring as a new device for carotid endarterectomy. J Neurosurg 122:148–151. https://doi.org/10.3171/2014.9.jns132856
All the authors have approved the manuscript and agree with submission to your esteemed journal. This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit sectors. We thank our operating room staff at St. Luke’s Medical University for their best work and cooperation. We also thank Editage (www.editage.jp) for English language editing.
Conflict of interest
The authors declare that they have no conflict of interest.
All procedures performed in this study were in accordance with the ethical standards of the institutional and/or national research committee (the institutional review board of St. Luke’s International Hospital, 19-R078) and with the 1964 Helsinki declaration and its later amendments or comparable ethical standards.
For this type of study, formal consent is not required.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
About this article
Cite this article
Ryu, B., Sato, S., Inoue, T. et al. A novel omnidirectional tin-alloyed ring retractor for craniotomy in neurosurgery: technical note. Neurosurg Rev (2020). https://doi.org/10.1007/s10143-020-01237-y